Search results

Search the forum Search Articles
  1. Bonestock

    Allison 6sp: Suncoast "whirring" spoolup

    Thats where mine ran until I installed the cooler. Now 170 is pretty normal.
  2. Bonestock

    Happy Birthday Kat

    Happy !!!:thumb:
  3. Bonestock

    Allison 6sp: Suncoast "whirring" spoolup

    Any chance a torrington bearing got installed 180? I have heard of builders tearing trans down for inspection and find torringtons flipped. Some fail right away and I guess some make it awhile.
  4. Bonestock

    The build is a GO!

    Rmr Make sure you have a battery disconnect switch with dual batteries and compound chargers. I got busted @ RMR not having this. They told me they would let it slide but not to come back with it lol.
  5. Bonestock

    20% over injectors

    I have had 15% 30% 45% 70% 80% and 100% injectors. IMOP if you are going to run stock fuel as in cp3 go with stock injectors. IF you are going to add a 10mm pump or dual c's add some injector.
  6. Bonestock

    The build is a GO!

    That looks like a sturdy battery frame. Mine was mounted in the back of the bed and was never an issue back there. Took up the corner space but was fine. I am sure you will like having the battery there.
  7. Bonestock

    Stock 2007 LMM with a bullydog tune

    Yes there will be problems. Lmm ecm totally different operating system. Use EFI Live and you are good to go.
  8. Bonestock

    LLY: Where to get a turbo?

    As long is its up and down its not terrible. The in and out is what tells you to get it fixed asap. Is he using oil also?
  9. Bonestock

    Lock up box

    My DHD universal box seems to work perfect in my LMM? What complaints are you having? I had some issues when I had a lockup efi tune and also the dhd box. I put stock tcm tune in and it works perfect every time.
  10. Bonestock

    LMM downpipe

    Thats cause it has to come off every 10 min lol.
  11. Bonestock

    LMM downpipe

    Lmm chargers can be a pain in the ass. Go back with an lb7 up pipe and life is much easier. I have had to wrestle the dipstick tube with a long prybar and won. They can be a pain. Easy way is to install a t4 pedestal and ditch the stocker. Its kinda tough now with everybody loving Marks 68 stg 2...
  12. Bonestock

    Help: engineer power reduced message.

    Get an EFI Live tune and they will Shut off p0101 from ever limping your truck again.
  13. Bonestock

    quickest with one cp3

    Its cool to see a single cp3 to be competitive and reliable. I know the Exergy lineup are some badass pumps!
  14. Bonestock

    what converter

    I like the Precision ML better than the 1056. So far this 1054 is a great converter with 35 inch tires.
  15. Bonestock

    You Don't own your Truck!

    Pull the factory ecm and let it sit on the shelf. Install your superchips ecm lol!
  16. Bonestock

    Duel CP3s or single nodded CP3

    I ran a 10mm exergy in the valley of my lmm. Thats a sick pump for sure. I am now trying an exergy sportsman to see how far I can push the stock injectors and stock turbo. Curious @ what hp it will hit the wall with the sportsman pump. Then a 68 stage 2r danville will be next.
  17. Bonestock

    .90ar vs 1.0ar

    We sold and installed a few banks units. Don't waste your money on the banks ic. No cooler egts at all. These were on basically stock trucks with tow tunes. I would go Mishimoto for price / quality best bang for the buck. Ppe coolers are nice but a bit more $$$$.
  18. Bonestock

    LMM Rear U-joint Straps

    Have you tried running the billet yoke from dhd? I had problems breaking factory yokes also in my lmm.
  19. Bonestock

    Going for 10's

    Not positive on this but wanna say Trent went 9's on stock straw. Sounds awesome just leave her @ 2900 usec with 120's lol!
  20. Bonestock

    The build is a GO!

    Cool vids! Truck runs hard!
Top Bottom