Search results

Search the forum Search Articles
  1. smkndmax05

    Recommend a good shop in South Carolina (Columbia Area)

    Has the turbo been off recently? It sounds like you have a drain gasket leaking from the turbo....Good luck with finding a shop.
  2. smkndmax05

    894hp 1590ftlbs on DP 72mm VGT single pump fuel only record today!

    Yes, that was a completely stock untouched top end on Marks stock motor, it still had the stock head bolts in it.
  3. smkndmax05

    COCOAL's build/brag/progress thread...:)

    Good to talk to you today!......Hopefully some of your questions were answered today.
  4. smkndmax05

    894hp 1590ftlbs on DP 72mm VGT single pump fuel only record today!

    He will push mine in the next couple of weeks, before we go to TS. It should give you a more realistic number.
  5. smkndmax05

    894hp 1590ftlbs on DP 72mm VGT single pump fuel only record today!

    Your welcome for the nudge to push it!!!!!:woott::woott:
  6. smkndmax05

    71.5 mm vgt 685hp 1090 tq stock bottom end lmm

    Good numbers.....I made 678 on a 72mm with 100 overs and a modded LBZ pump and was outta fuel.
  7. smkndmax05

    BRAND NEW PRODUCT! BT DieselWorks surface-mount DSP-5 switch!

    :thumb:
  8. smkndmax05

    Compact twin kit

    Looks good Caleb.....:woott:
  9. smkndmax05

    Broviak built his so I guess I'll build mine too

    Well it got a work out over the weekend on the 3rd tune and it feels a lot stronger than the dyno noted!!! Ask SmokinHotLLYgirl about 55-60 4th gear rolling burnouts.:roflmao: I'm seeing 45 lbs of boost 70 lbs of drive... It's a blast to drive!!:woott:
  10. smkndmax05

    Broviak built his so I guess I'll build mine too

    The truck made 733/1331 2000 pulse tune. 26.5 k rail!!! 40 boost 60 drive 1400 degrees It is a monster on the street. Time for some break in!!!:woott:
  11. smkndmax05

    Broviak built his so I guess I'll build mine too

    Well, the truck made it to work......We'll see if Mark makes some noise on the dyno today!!!!
  12. smkndmax05

    Broviak built his so I guess I'll build mine too

    Short Block Here's some eye candy!
  13. smkndmax05

    Broviak built his so I guess I'll build mine too

    Well, here's the update.....I pulled the motor back out to investigate the leak, found I had a bad valve cover that wouldn't seal. Mark and I put everything back together and I finally fired it up last night... NO LEAKS.....Its been a long 2 months. I have to put the front clip and the driveline...
  14. smkndmax05

    LLY: Compression Ratio

    I went down to 15.5....
  15. smkndmax05

    Mike and Guy, I'm calling you out!!

    Nice.....
  16. smkndmax05

    LMM: 72 danville vs others

    68MM VGT has made a max of 740 HP and the 72mm has made 821..... I was hitting about 62 lbs of drive pressure on my big tune, 40 lbs of boost. My big tune made 678 on the dyno.
  17. smkndmax05

    LMM: 72 danville vs others

    Hopefully I will have some dyno numbers next week with my new setup......Hoping for over 800 on dual fueler and the 72MM.
  18. smkndmax05

    Broviak built his so I guess I'll build mine too

    72 I like the way the big single drives, and mark will probably say the samething.
  19. smkndmax05

    Highest Stock CP3 HP?

    pump It was a modded lbz pump.....I did 657 on a modified LLY pump and the 72
  20. smkndmax05

    Broviak built his so I guess I'll build mine too

    Turbo For two years, I was running a 68MM stage 2 and 45 overs with a modded LBZ pump, I changed to a 72MM Novemeber of 2011, and then I put 100 overs in the truck Novemeber of this year.
Top Bottom