Search results

Search the forum Search Articles
  1. kubitza123

    Amp tires

    I haven't used the AT but my 35-12.50x20 MT are at 30k and should make 40 before they need replacement. I'm sure I'll buy them again since I can get them for $220ea out the door or the AT I can get for $180ea.
  2. kubitza123

    LLY: truck cranks for like 5-6 before it will start issue, WHY?

    I'd buy a new filter head before I even thought about replacing injectors. Is it something that just happened within a couple of days or been gradually getting worse over a year ? If just started happening I'd bet filter housing has a problem.
  3. kubitza123

    Going for tens in the zf. (Mission Accomplished!!!)

    They are straight cut gears/ dog boxes from my search online used in lots of Rally cars for clutchless shifting . Not sure if they make such for a truck but if they do of it could be done you would have the fastest shifting truck yet. Not to mention how much easier it would be on the drivetrain...
  4. kubitza123

    Going for tens in the zf. (Mission Accomplished!!!)

    Maybe on the drag quads they actually cut the gears themselves so when you shift without the clutch there is no resistance, slides right into gear like you had the clutch pulled in. Not sure if it could be done on a truck trans but if so would be the cats ass.
  5. kubitza123

    Going for tens in the zf. (Mission Accomplished!!!)

    I wonder if a guy could cut the gears in a manual truck transmission like they do in a drag banshee trans?? Then you would just use the clutch off the line once and that's it? Not sure if anyone has ever done or tried it with a auto manual trans but if it could be done it would be kickass ...
  6. kubitza123

    Billet Pans now at Limitless Diesel

    Evan your 2 months late ,only billet part my trans don't have now. Guess my cast PPE will work lol. But sure is a nice looking pan.
  7. kubitza123

    What does everyone buy these days for good tie Rods , idler ,& pitman?

    Thanks guys , going with the complete Krypto setup. Have the upper A-arms already and have been happy with them so I'm sure I'll be happy with the tie Rods setup.
  8. kubitza123

    What does everyone buy these days for good tie Rods , idler ,& pitman?

    Truck needs new tie Rods , idler and pitman . What's everyone thinks the best stuff? Been looking at Krypto stuff . Anything better? Wanting large Tie rod assembly whichever brand i go with so I can run in 4wd. Suggestions welcome.
  9. kubitza123

    2004 LB7 with one injector at -8

    Plenty of trash fell into injectors as you said when I removed them but I bought everything to pull all four so i could hold them upside down and clean throughly. No way I'd not pull the other 3 if I was installing just 1. The chances for debris ending up in one is way to great.
  10. kubitza123

    2004 LB7 with one injector at -8

    Installed a injector from Brent and no more smoke . Thanks Brent she runs like a champ.
  11. kubitza123

    Nitto 420s on 22x12 4 inch lift

    I'm still trying to figure out why everyone likes their wheels hanging half mile out from under the truck?? All your doing is killing your already shitty built wheel bearings and ball joints. Might as well top everyone and get some custom made 28" -60mm offset and 16" wide. Oh don't forget to...
  12. kubitza123

    LLY: Sudden Extreme Overheating Symptoms

    Converter prob gave up and clogged coolers etc. Been there myself.
  13. kubitza123

    Texas nationals who's going?

    Lmfao , helps to read the date
  14. kubitza123

    Texas nationals who's going?

    I'll be there , only been trying to go for the last 3yr and this time I'm gonna make it lol.
  15. kubitza123

    2004 LB7 with one injector at -8

    Not worried about the 3hr job since doing it myself . Yes I plan to clean up everything if doing just the one. Main question is can just one bad injector make a truck haze bad at idle or should I be looking at something else?
  16. kubitza123

    2004 LB7 with one injector at -8

    I've tried every cleaner and they didn't change anything. I don't see why replacing once will trash 3 others??
  17. kubitza123

    2004 LB7 with one injector at -8

    Quick question for those who might know. My 04 LB7 has around 140k and has basically all bolt on's and Kory Willis tuning , with stock fuel and air. Injectors were replaced I believe in 2007 and have roughly 70k on them. All of them Have great balance rates except #1 and it's around -8...
  18. kubitza123

    LB7 to LLY heads question?

    I have a low mileage 2004 LB7 that's about to need injectors myself. I want to head stud it as well when I do the injectors so maybe I should go this route myself . What is actually needed to swap a 04 LB7 over to the LLY setup?? Anyone have a complete list of exactly what's needed or a link...
  19. kubitza123

    L5P L5P Tuning

    Buying a truck without a LP5 would be the easiest solution. If the bottom end can't handle 700+hp in a heavy truck I don't see any reason to own it over a older one unless you want latest and greatest with emissions.
  20. kubitza123

    Lift kits

    RCD makes a great lift and drives and rides like a dream.
Top Bottom