Search results

Search the forum Search Articles
  1. MAXLLY

    What was your first power mod on your truck?

    BANKS Kit.
  2. MAXLLY

    Simon's new test mule

    Cool, can't think of any PC Card that'll work in the middle of MONTANA:rolleyes: Thanks SIK
  3. MAXLLY

    Simon's new test mule

    Simon, How did the weekend go your truck? Can you still come to this jungle (SoCal) soon?
  4. MAXLLY

    head stud installation cont

    Carbon build up is ok, IMO. Heads up, i heard somebody cleaned the carbon off the tip with a wire wheel... bummer! The injectors are junk after you clean them with a wire wheel. I think it "smears" the orifice and changes the flow/spray characteristics. You prolly already knew that but...
  5. MAXLLY

    head stud installation cont

    Get a piece of 1/4" copper tubing and wrap it to the shop vac hose with duct tape, it may whistle a little but it'll be a real super sucker. You could tape a piece of scotchbrite to one side of the 1/4" line and scrub and vac same time. I used to do this all the time when cleaning out holes fror...
  6. MAXLLY

    oil cooler delete

    Not to speak for Dan (this is his product), I just finished installation of this product. 1. This kit allows you to run up to #12 line from engine to cooler and back. 2. It's tapped in (2) places for feeding single or twin chargers, IIRC it has (1) each 1/2" and 1/4" ID line/holes. 3. It...
  7. MAXLLY

    Headers and hi flow up pipes

    headed out the door, google these 2 guys. Paul? Washburnracing.com in socal burnsstainless in El Cajon, California Good luck. If i send you to a dead end, PP me and I'll dig and get you some contacts.
  8. MAXLLY

    Simon's new test mule

    SWEET! Good Luck Simon, that's so fun.
  9. MAXLLY

    Thinking out of the box hardparts!

    Cool, That rod looks like it'll go big... very big. If i move my radiator to the bed i think i can use one of the dual gear drive pump set up's... haven't figured out the alternator mount yet! Very nice, thanks for the pic's. Good Luck!:D
  10. MAXLLY

    piston ring alinment

    yep they all go far apart. It's late for me....like 2, 6 and 10 o'clock. Prepare for sore fingers from gapping rings. :D It takes time and TLC.
  11. MAXLLY

    PCV re route idea

    Cool kit. I like shiny alumineeeum stuff. I ran my hose out the driver side and into the boxed opening in the frame rail just under the cab drivers side, if it ever leaks it'll catch in the frame rail versus my driveway. On my truck there is hole in the bottom of the rail for it to drain out...
  12. MAXLLY

    What do you guys do on nice days?

    SPEED CHANNEL...... ESPN........ Do several 12 ounce curls and take a 3 hour power nap:D
  13. MAXLLY

    Attn: People running ARP head studs

    Driver Greg? The person named Greg who is a driver of fast cars? Cool!!
  14. MAXLLY

    Attn: People running ARP head studs

    I have heard so may different bolt specs/torque specs it's a wonder half the people doing this stuff don't pop a gasket.:rolleyes: 96lbs, 110lbs, IIRC ARP claims 120... factory claims in this order, standard is "in and out", rinse and repeat 3 times....jesus christo. And now we have new bolts!
  15. MAXLLY

    Better power-straighter rods

    Makes sense Larry :) In my build I considered trans/oil and anything else attached to the water cooled system as parasitic and removed and/or relocated it. The only thing my rad is doing is cooling the motor, the only thing in front of the rad is the IC rad (single row dual pass) and the A/C...
  16. MAXLLY

    LLY fuel injector return line

    Don't know the part #, I broke one as well and haven't gotten around to dealing with it yet. The line is 1/8" minus soft braid and slip fit to the plastic connector. At first blush from GM they only sell the entire "side", meaning you/we have to buy the pass/driver side to get one plastic...
  17. MAXLLY

    Thinking out of the box hardparts!

    Curtis' is just getting started I'm sure. For those that didn't know, Curtis used to build BANKS stuff. He was nice enough to come down and walk us through his oil pump a couple months ago and when i had a problem... he had a rep at the shop in 3 hours. I am sure he can't do that for...
  18. MAXLLY

    Simon's new test mule

    looks good Simon!! Hang tough Man! Can you see the light at the end of the tunnel yet? I can... but i am afraid it's an oncoming truck or train:), somewthing bad this way comes type of BS. Regardless, good luck with the trans case. You are the king of "deals finders" LAter
  19. MAXLLY

    Oiling, Air Filter, Turbo, Fuel Return ?'s -

    Thanks Simon. Appreciate the help.:) I think i got everything i need, THANKS, anybody else know what our oil temp is out of the block? After running the motor??
  20. MAXLLY

    Thread on Block Oil Feed:

    Industrial Hardware shops. Let yer fingers walk a little.:)
Top Bottom