Search results

Search the forum Search Articles
  1. MAXLLY

    Stock rods!

    I ran a similiar set up, no 4088, for 30K miles IIRC. No issue whatsoever when i tore down the motor. Bearings and rods appeared fresh as a daisy. Dieselson may be able to share some insight. You could PM him if u like
  2. MAXLLY

    need gasket list ASAP

    Although Isuzu is making this motor worldwide (so service tech claimed) we can only get parts from GM and GM doesn't offer a master re build set??? Well nobody i talked to had a clue, perhaps you will find a better dealer who can dig around a little. I did have better luck with an ISUZU truck...
  3. MAXLLY

    who is runnin crower rods

    I am.:confused:
  4. MAXLLY

    New to the site

    Welcome! This is the place.
  5. MAXLLY

    Oiling, Air Filter, Turbo, Fuel Return ?'s -

    I didn't even think in that respect. I'll keep that in mind if i have any other scrambled questions. Thanks again.
  6. MAXLLY

    Oiling, Air Filter, Turbo, Fuel Return ?'s -

    Perhaps i should clarify the oil temp question, When choosing a line type we have several criteria to consider... pressure, heat, and fluid type. I can use push lock, pressure criteria and fluid type is compatible (i usually use 50% of design criteria), but maybe not for temp it's only good...
  7. MAXLLY

    Oiling, Air Filter, Turbo, Fuel Return ?'s -

    Thanks Dude! Salad saves again.
  8. MAXLLY

    Oiling, Air Filter, Turbo, Fuel Return ?'s -

    Thanks Pat. I thought about 8 threads but i would have to quit my day job to track them all!! Appreciate the response.
  9. MAXLLY

    Oiling, Air Filter, Turbo, Fuel Return ?'s -

    Need confirmation on the following. Wasn't sure where to put this so here it is... 1. Is it correct that DMAX oil temp is roughly coolant temp? Say 200*?? Anybody know the differential? 2. What is return line pressure like for the fuel system post CP-3? IIRC 2-3 lbs? Is this correct? 3...
  10. MAXLLY

    Whose coming to the Pow Wow??

    Headquarters are just and hour North of me, see you then. Keep us posted on arrival. IIRC Simon will be bringing his truck as well rahrah!! Safe travels.
  11. MAXLLY

    ok i got a noob ?

    I didn't take my stock charger out either. I used a VERY long extesion and went at it from behind the crossmember, closed one eye so i could see over the top and got 'em all first shot. When i put it all back togehter i replaced the bolts with double ended accessorie studs, that way i only...
  12. MAXLLY

    BD @ N20 = Ouchy

    huh! Not that big a shot. Sorry to see the carnage... off to the candy store you go! Good Luck with it.
  13. MAXLLY

    Anyone Installed Laminate Floor Themselves?

    The undercut saw is an offset handled saw that allows you to cut off the bottom of the door jambs, allowing the wood flooring to slip under the door jamb versus cutting around them (cheesy and less professional looking). I may be wrong, in different parts of the country some stuff has a...
  14. MAXLLY

    BD @ N20 = Ouchy

    How much spray did you put to it? The same 35 jet in your sig or more? Thanks for the info.:)
  15. MAXLLY

    Read This: Fresh Start.

    Very Cool Pat.:cool: The drama ended here.
  16. MAXLLY

    12.44 on Stock Turbo #2 Only

    Congrats Man, that's VERY sweet. I like the 60's personally, from the slowest to the fastest pass your 60 improved .54 IIRC But the over all time improved .163? Not bashing, trying to help. Look at the MPH, although your getting out of the hole faster and getting on the pipe earlier, the...
  17. MAXLLY

    PPE Centerlink

    Dan will take care of you.
  18. MAXLLY

    Fuel rail remove

    Taking the rail out is gonna take some work, it's buried. If you are sure you can't get it out (most use a good 12 point IIRC) I would attack it like this. Disco all the injector side lines, drivers boost tube, return lines, sensor and transfer lines and remove the (2) 12mm bolts holding the...
  19. MAXLLY

    McRat Racing in Jamaica...

    I have heard that as well (Costa Rica), we'll have to try it next year. Wifey wants to go back to Jamaica in November... I get a built truck she gets what she wants. It just ain't fair i tell ya:o BTW- Your truck looks exactly like mine did before i started... except you have nicer rims:D I...
  20. MAXLLY

    McRat Racing in Jamaica...

    We've have stayed at the Couples Resort and the Couples Swept Away, both are in Negril. Nice place, nice beaches. However, i must say it is has become more commercial in the last 5 years.
Top Bottom