Thinking out of the box hardparts!

[LarryJewell]

awesome Keith. I am very interested in the cooler. Are the any pictures available

Put me down as another interested party

 

[sweetdiesel]

wheres the pics?
My oil pump arrived yesterday, But i like the duel cp3 idea and the water to air cooler

 

[C.A.P]

This is good, any thing I have seen from Curtis has been top notch !

 

[Nasty Girl]

wheres the pics?
My oil pump arrived yesterday, But i like the duel cp3 idea and the water to air cooler

Sorry Simon still waitin on Curtis.

 

[Bentley]

Keith its good to hear you are getting her back up and running. I was saddened when I heard you were selling...

New hard parts, interesting...

 

[Nasty Girl]

Keith its good to hear you are getting her back up and running. I was saddened when I heard you were selling...

New hard parts, interesting...

Most of Curtis's new parts are directed more for "competition" style setups. So in my case I will have his new oil pump added to the mix but thats it for now. Nasty has always been a daily driver and always will be. I had full intensions of going with a "Full Blown" setup from Curtis but damn I couldn't give up the A/C!

As far as selling well............. I am going to give her I more BIG kick at the cat before I consider doing that again.

 

[Nasty Girl]

Here's some pics of the new competition dual fuel pump system. The plate on the front of the engine can be customized to fit any drag chassis or pull truck. This one is going on the Goodfellow Streamliner. The pumps are driven off the cam so they end up running at 3700rpm when the crank is at 5000rpm, that way the pumps aren't overspeeding and are still in their peak efficeny range.

BADASS!!!

 

[RickDLance]

Nice stuff.

 

[Nasty Girl]

And some more kewl stuff.

The air to water kit is almost complete, waiting for some final touches before posting pics.

 

[MAXLLY]

Cool, That rod looks like it'll go big... very big.

If i move my radiator to the bed i think i can use one of the dual gear drive pump set up's... haven't figured out the alternator mount yet!

Very nice, thanks for the pic's. Good Luck!

 

[never satisfied]

:drool:

 

[malibu795]

these look like new oil pan/guirdle correct?? with a windage/oil scraper

http://www.duramaxdiesels.com/forum/attachment.php?attachmentid=2831&d=1209741742

http://www.duramaxdiesels.com/forum/attachment.php?attachmentid=2830&d=1209741722

http://www.duramaxdiesels.com/forum/attachment.php?attachmentid=2829&d=1209741699


that work?

 

[maddogg101920]

these look like new oil pan/guirdle correct?? with a windage/oil scraper

:redx:

 

[malibu795]

:redx:

check it again

 

[RickDLance]

Nope, still not there.

 

[mde]

Yep, there work good, was on the engine dyno with this oil pan a few times.

check out: www.dieselperformanceresearch.com

V

 

[mde]

NastyGirl:

Anything new on your side????

V

 

[sweetdiesel]

How much for the oilpan?
and are the bearings a new bearing from Clevite?

 

[sweetdiesel]

I see Curtis has a standalone ECM on his site now

 

[Turbo Buick 6]

I was just looking through this thread last nigh, how odd you dug it up