Search results

Search the forum Search Articles
  1. Chad006

    How much should jesse spray my old Zf6?

    I say put it on a momentary switch on the shifter and spray it as traction allows.
  2. Chad006

    Going for tens in the zf. (Mission Accomplished!!!)

    Sorry too hear that guy, it definitely has 10's in it. Maybe Time for a new thread "Going for 9's in the zf" :D
  3. Chad006

    Lml injectors in a lly head

    Only way it would work would be too bolt the lml heads onto your built short block. Lml's are piezo injectors.
  4. Chad006

    New setup is done

    Stock filter head? Aren't cylinder pressures typically higher with stock sticks versus a larger injector at same hp levels?
  5. Chad006

    Van thermostat housing

    That's not my truck, I am still running a hose with my van t stat.
  6. Chad006

    Van thermostat housing

  7. Chad006

    Van thermostat housing

    I know they're not a vendor here but the guys at sdp are in the process of making hard pipes for the van thermostat housing. Scott didn't have them ready when I was down there but I will be ordering one when they are. Another option and cleans things up a bit.
  8. Chad006

    G80 failed.. best replacement

    Loving my new tracrite so far!
  9. Chad006

    LBZ: My turn has come...

    Definitely cast especially up north here with our winter temps. Highly recommended ovals and I see no need for reliefs unless you go with a fairly aggressive cam.
  10. Chad006

    S369sxe or s467

    Start planning an engine build if you haven't already.
  11. Chad006

    S369sxe or s467

    I would just do a 0- 100 gauge, I bought a 60lb gauge and now will be replacing it with 0-100 with my build.
  12. Chad006

    LBZ: My turn has come...

    Remember wagler rates that assembly at 800 flywheel hp not rear wheel. Not saying it couldn't be sufficient for more as I'm sure it would, just something to think about.
  13. Chad006

    White Lightning's new engine break in on the engine dyno/turbo testing!

    X2 was thinking the same.
  14. Chad006

    Lockup box

    I run Ben's (bt diesel works) box on mine and have a good results. Street or strip it's great. I just leave it in auto for the most part.
  15. Chad006

    Converter for new build?

    So I am in the process of finishing up my build. Setup is a 68mm 3794 over a billet 480, exergy 100's and 12mm pump, SoCal motor and full billet Allison. The truck is gonna be a street/strip with some occasional towing. The converter I have is a goerend "R", this is what was recommended to me...
  16. Chad006

    LBZ: List of Best tuners for EFI live

    Aaron wiebe-all in trucks is another option. He will most likely be tuning my truck in the very near future. Heard lots of good things and had tunes from most of the big guys so it will be interestering.
  17. Chad006

    Duramax build and the machine shop.

    I really can't see that charger getting you to the 700-800 mark on fuel only, and definitely would not make for a good atmosphereic charger over stock. What is your fuel system going to consist of?
  18. Chad006

    Finally made some passes.

    Congrats on the pass! Looks like it'll actually run reasonably clean once you get your launch figured out, considering what you've got for fuel.. What converter are you running?
  19. Chad006

    Industrial injection quad turbo Duramax for UCC 2018?

    Seen that they just dropped pulley sizes, should be interesting for sure! And those zoomies with flames pouring out, just awesome. Does anybody know what Jeremy's best et is with it to this point? I would like to see what a dx500 could do with a large triple setup though.
  20. Chad006

    Industrial injection quad turbo Duramax for UCC 2018?

    Yeah it's quite the publicity stunt for sure. Would be neat if they got it to make big power though, and put it to the track.
Top Bottom