Search results

Search the forum Search Articles
  1. delong_1

    lockup controller

    Guys are we going to be able to get a lockup controller from you within the next week or so? I need one before the Az race and we cant seem to get ahold of anyone and when we do we cant get a straight answer. we were also going to do a tapshifter if at all possible. please let me know so i...
  2. delong_1

    1016 hp

    i should be able to get to AZ and will probably be at bandimere quite a bit this summer but i will keep you posted if we go to bandimere. Thanks guys!!!
  3. delong_1

    1016 hp

    Thanks guys!!!!
  4. delong_1

    batmo turbos, fact or hype?

    Today we actually tested this we didn't have time to test them all but we did test a double bat and a precision both 75 mm and the precision made about 50 more peak hp and over 100 everywhere else just telling everyone what we saw on the dyno
  5. delong_1

    1016 hp

    I thought about it but this is my daily driver and I really hate to hack it up
  6. delong_1

    Engine diagnosis

    Congrats!!!! Sure does feel good to hear them run again.
  7. delong_1

    1016 hp

    Did some dyno work at the shop on some of the projects at the shop. I pulled mine on very last and made a few pulls. Dialed in the wastegate a bit and went from 970 ish on up to the best of 1016hp same tune as I have been running for a while. Egts were great at 1450 boost was 80-85 psi. The dyno...
  8. delong_1

    Best N20 setup?

    We always use nx stuff on shop builds
  9. delong_1

    Main seal installer

    Cool, ya just let me know when you need the tools or anything else.
  10. delong_1

    Fleece Performance TapShifter V2

    .................................
  11. delong_1

    Quick diesel rules 12.0/7.7

    It was on a ford not mine but summit has 8 gal cells and iirc that's what it was. They come with straps also
  12. delong_1

    Quick diesel rules 12.0/7.7

    In SS you have to have batteries forward of the firewall and tank in stock location. We put a fuel cell where the stock tank was. Fwiw I only run one battery all the time, starts fine
  13. delong_1

    Main seal installer

    If you want I will let you use mine. Just let me know and we can work something out
  14. delong_1

    How Important Are Billet Main Caps in a Build?

    I have billet caps, filled block, and a girdle, overkill? Probably but I wanted the bottom end as stout as possible
  15. delong_1

    Fleece Performance TapShifter V2

    hey guys, we have tried calling a few times to see when we could get a tapshifter and lockup box and no answer. any idea when we will be able to ahold of these parts? really like to get them asap for testing.
  16. delong_1

    LB7: ATS duel Fueler kit

    Yes sorry I meant the later style bracket on my 01
  17. delong_1

    LB7: ATS duel Fueler kit

    Ya I had to install an 01 bracket
  18. delong_1

    ECLB to ECSB conversion?

    We just shortboxed my bosses single cab long bed 6.4. Wasn't too involved, he just bought a short bed
  19. delong_1

    Limped ATS today, ???

    Jason was a good guy unfortunately he recently quit.......
View older results
Top Bottom