Search results

Search the forum Search Articles
  1. sweetdiesel

    Anything new?

    I am wondering the same? and when can I get some?:D
  2. sweetdiesel

    Help: Code P0299??

    I use to get that code also from high idle. give me a bit and ill figure out what I did. search that code on here in the mean time.
  3. sweetdiesel

    Tuning for dummies

    any codes that do pop up just search realted tables that match. lly are pretty easy, but sometimes shutting codes off dont help. if ya run in to a bind PM me you email addy and ill help a out. you will benifit from timing changes in the lower areas to aid in spooling, but not to get the...
  4. sweetdiesel

    Help: Code P0299??

    and u adjusted c0804 allready?
  5. sweetdiesel

    Question: p pumped dodge???

    UV6H9uBprFk
  6. sweetdiesel

    Highest Stock CP3 HP?

    I would mod the suction pump if you havnt allready done so. http://www.duramaxdiesels.com/forum/showthread.php?t=11641&highlight=cp3
  7. sweetdiesel

    LLY: Won't give me max mm3

    The issue never arose untill i went over 750hp, I do know a few trucks also that never needed this change. But mine and for sure 1 other did? It is strange to say the least.
  8. sweetdiesel

    LB7: Fuel pressure tester?

    On a lb7 A 1/4" or 3/8 double barb fitting ( cant remember the hose size ) a chunk of hose a barb fitting by 1/4" female npt to put a gauge onto hose clamps Pull the brass fitting off and hook up to the hose.
  9. sweetdiesel

    LB7: Fuel pressure tester?

    Re you reffering to the high pressure side or low pressure? High press use EFI DVTs and ramp rail pressure up to 160 mPa. And log rail pressure with scan tool. Low press you would need a lift pump and then check at the port on the front by the alternator or T off the fuel hose somewhere as...
  10. sweetdiesel

    LLY: Won't give me max mm3

    Old thread http://www.duramaxdiesels.com/forum/showthread.php?t=16504&highlight=speed Ive seen trucks unaffected by this table change also,Strange but it worked well for me.
  11. sweetdiesel

    LLY: Won't give me max mm3

    It did on my LB7, It would not fuel in the 86mm3+ fuel tables. Disable the tq reduction table in the TCM and was back to full fueling.:woott: I do agree that BO742 and B1103-5 need to be adressed these are the King and Queen fueling tables on a LB7 & LLY. If your PW tables are set the same...
  12. sweetdiesel

    LMM: Pistons?

    :D
  13. sweetdiesel

    50 over injectors

    Over a 1000hp with a max effort tune, Your PW will be 3300 +
  14. sweetdiesel

    LMM: Pistons?

    Arias true forged are around 1800 a set. Mahle pistons have to high of a silicone value to me to be a true forged piston. The higher silicone means better for daily driving on cold start ups, but reduced strength, especially in a diesel where temps are genarlly higher. JMHO
  15. sweetdiesel

    Injector size ?

    your pulse width is almost maxed right now with 60 overs and 900hp going to 100s isnt going to drop it much IMO The only issue on big sticks for non DD is getting a turbo to spool,It difficult to dial in large turbo spooling if you add to little / too much fuel. Other than that on the big...
  16. sweetdiesel

    Injector size ?

    I never understood how a company could say a HP rating on a injector? It all has so many varibles! You could almost do it with a stock injector but your PW would be so high that the motor would probably not last very long. As Josh said it depends on what you want to do with the truck. 60...
  17. sweetdiesel

    twin lb7 pumps

    depends on the pumps conditions....Shouldnt be a problom to push over 1000hp
  18. sweetdiesel

    From lifted to lowered

    Looks good Shane, and a nice bit of weight removal!
  19. sweetdiesel

    Bypass cooler? Radiator fitting interchange?

    if its not for a daily driver just use a w/a trans cooler. chisled makes them and for the price u wont beat it getting any other cooler
  20. sweetdiesel

    Awesome belt set up

    ttt
Top Bottom