Search results

Search the forum Search Articles
  1. smith6.6

    Lb7 still smoking

    hook your tech 2 back up and look at injector command if you get below 0.32ms it will usually smoke
  2. smith6.6

    How much hp will it take?

    There are ahand full of us running 4th 35's and 3:73's all the trucks are in high 700 to 800 hp trucks, no one unlocks there converter and we spin out. If your not atleast 750 and your tracks bite hard like ours you won't hold.
  3. smith6.6

    4in. lift questions?

    I run the tc lift and pull with my truck and have no issues, It is a very nice kit at a resonable price if you want to raise it I would just do it you won't regret it
  4. smith6.6

    LB7: Head Gasket Repair Time

    I only pull the radiator, I don't pull off the front clip and you can get all the bolts out with out tiping the engine by the trans It's not that bad to do. I will usually pull the exhaust manifolds off it makes it easier to pull the heads.
  5. smith6.6

    single stack with twin turbo's

    I have a 7'' stack twins no muffler truck i a ec it has some rummble when accelerating but cruising it's naot bad at all. It sounds really good and you can still talk to the other people in the cab.
  6. smith6.6

    drive pressure gauge

    I used copper and looped it to disipate the heat then it went to plastic line directly to a boost guage, it plugged the guage after a little over a years use. look for a in line charcoal filter thay work well. You can find the filters where you get hvac parts
  7. smith6.6

    DIY twins/ build thread

    which turbine wheelprbably not the large one, I don't remember the size off hand. The larger turbine wheel is only ofered with the 1.32 so if you have other exhaust housings available it is one of the smaller two. It also tepends on what your towing I was towing a 34ft 5th wheel toy hauler...
  8. smith6.6

    DIY twins/ build thread

    1.32 may be to big depending on what your doing with the truck, I coyld only get it to really take off at around 3000rpm and up. I would say if your going to use it as a daily driver and tow with it yet you will want to be 1.01 or 1.10 I ran a little smaller yet because of truck pulls, hitting...
  9. smith6.6

    Weight Bracket

    boy your a smart ass just trying to help you out see you at the pulls if you make it
  10. smith6.6

    Weight Bracket

    Just so you know you can't stick out any further than 60'' out from the centerline of the axle
  11. smith6.6

    Hey BTPA Guys, hitch question

    I have the putnam V and reinforced it before it went on the truck after seeing johns tow beast bend
  12. smith6.6

    wheel tire combo for towing heavy...

    The michelins will make a difference they are a great tire for towing but horrible traction in wet conditions once there about half worn definatly go with a E rateing and if you go with a taller wheel so you have less side wall it will help a lot. Nitto has some new tires I think there called...
  13. smith6.6

    Big single or twins??

    On the tracks around here there have been quiet a few different trucks trying different turbo's out some with luck and others down sized or changes exh housings.
  14. smith6.6

    Rail pressure guage

    anything on them
  15. smith6.6

    Big single or twins??

    some of the guys running a big single have a hard time keeping them lit all the way through the track, they snuff them out at the end easy your not going to run very high rpm's at most the tracks. If you hit 4th gear you will be under 4000
  16. smith6.6

    New toy.... 06 Rhino!

    I've seen turbo kits for the 66o not sure if they make them for the 450, that will give you plenty of power
  17. smith6.6

    MPI Twin Owners, Come in!

    If you didn't get the ss exhaust housing you should it spools a hell of a lot faster, I run that in my twin setup
  18. smith6.6

    PPE Twins Pictures:

    That looks really nice, I like how close they kept the gt55 to the engine. I like the coolant reservoir.
  19. smith6.6

    New Custom Crossmember for Alli

    mcrat I know see how you are if someone doesn't agree with how you feel there an idiot, well I did the testing for you on the HTT before you started selling it and gave you my feed back on how it worked, so you better go back to what you posted on it because someone you think is an idiot gave...
  20. smith6.6

    New Custom Crossmember for Alli

    I don't see the need and that is my opinion, I haven't had issues or have I seen any issues with them in this my area
Top Bottom