Search results

Search the forum Search Articles
  1. quadracer37

    LML Performance Potential

    yes you'll need a lbz/lmm style downpipe, with the 9th injector and EGT bungs you would find in an LML factory downpipe.
  2. quadracer37

    LML Performance Potential

    Ahh yes if your referring to a VGT drop in then yes you would need those parts. My bad I was assuming fixed vane single turbo.
  3. quadracer37

    LML Performance Potential

    You can remove the downpipe, EGR delete kit,and intake from that list if your going twin turbo or single turbo upgrade route because those kits come with all those parts. :thumb:
  4. quadracer37

    Question: Where To Buy A Crank?

    What is the PN for this? Thanks
  5. quadracer37

    Question: Where To Buy A Crank?

    I know of a few very healthy 1500+ hp pullers using lml cranks without any failure.
  6. quadracer37

    Alternate HP fuel line routing for dual fueler

    Likely only rated for P-pump pressure and not common rail high pressure. To thin of wall; I would verify their pressure rating before using them, I have seen people try and use p pump lines and it does not end good!! Just FYI :thumb: It is optimal to feed one pump to each rail if and whenever...
  7. quadracer37

    LML Performance Potential

    X2, cp3 conversion is the better way to go.
  8. quadracer37

    What is everyone doing to the LML?

    2013 and older we strongly recommend the cp3 conversion kits. The 11-13's have the most pump failures which will send metal thru the system and ruin the injectors. The stock trans will run at 600-650hp for a little while, but it will slip and it will need to be built at these hp levels. The...
  9. quadracer37

    Question: Where To Buy A Crank?

    Good to know. What is the part number?
  10. quadracer37

    Question: Where To Buy A Crank?

    Where did you end up finding the best price on that?
  11. quadracer37

    Crazy Duramax Engine

    Bosch standalone and tractor inj. Will be cool to see this thing running in super stock with all the Cummings!!!!
  12. quadracer37

    LML 2015 denali cc/sb

    Nice turbo kit and pump conversion kit :D:thumb:
  13. quadracer37

    LB7: s475 over stock build

    Either 8mm x 1.25 or they are 3/8-16. 50' will do the hot pipe and about 3/4's of the down pipe.
  14. quadracer37

    Coolant tank

    We are actually working on incorporating a site glass on the front of our tanks.
  15. quadracer37

    Wiseco steel pistons

    we ran them in a truck all last season
View older results
Top Bottom