Search results

Search the forum Search Articles
  1. Bbuchanan11

    What gear do you guys usually trap a 1/4 in?

    Finally got my truck to the track for the first full run on it (broke the crank last year) I always put it in manual and select 5th to keep it out of 6th.. I almost swear it was on the rev limiter going through the traps granted this truck is faster then my last one but I always raced it keeping...
  2. Bbuchanan11

    6an feed line too small?

    They are both stock pumps and as of right now have the stock 5/16 fittings on The back of them
  3. Bbuchanan11

    6an feed line too small?

    Not sure where to put this but it’s for a drag truck. I’m trying to clean everything up I want to make the feed lines for the cp3s an line. I got 8an going in to 2 6an lines for the feed lines. Looking inside the 6an fittings they look pretty small will they work or no? Thanks in advance
  4. Bbuchanan11

    Broken Crankshaft Count?

    The pics ikeg posted happens to be my truck... my buddy put a go pro in my truck thst night. I have a good video of it breaking just don’t know how to post it.
  5. Bbuchanan11

    Adding tension to your dayco tensioner

    Katech engines makes a lot of nice billet manual tensioners not one specifically for a duramax but might be able to get one to work... I used one on my supercharged Silverado and it stopped the belt from slipping.
  6. Bbuchanan11

    Need some help p0336 p0606

    So quick question for you guys I got my motor out lastnight and on the rear engine plate there are heli coils in every bell housing bolt hole... is this factory? This is obviously my first time getting this far in to a duramax but I’m going to be stripping it down to a long block to take to...
  7. Bbuchanan11

    Need some help p0336 p0606

    What do you guys think about the Callie’s durastar crank?
  8. Bbuchanan11

    Need some help p0336 p0606

    Motor already has corrillos mahle pistons and arp main bolts... I’m already expecting the block to be junk
  9. Bbuchanan11

    Need some help p0336 p0606

    Welp crank is broke... so what’s a ball park cost on parts and machine shop work?
  10. Bbuchanan11

    Need some help p0336 p0606

    So I took the truck in my sig to the track for the first time.. first run right after 1/8 miles it cut out and shook violently then would just lope real bad.. idles fine now but shakes when you rev it and the tach jumps all over the place threw a p0339 and p0606 also a p2761 which is I trans...
  11. Bbuchanan11

    noise with door open or hood open

    Yeah it’s weird you can hear it when I open the door then like 30 seconds after I close it you can hear it again...
  12. Bbuchanan11

    noise with door open or hood open

    I’ve tried to google this but what is the rod on the turbo that moves when you open and close the doors or open the hood? And why does it do that?
  13. Bbuchanan11

    Word on the streets -- L5P tuning

    I love my l5p for a bone stock truck it runs! But I don’t Think I ever want to own it out of warranty
  14. Bbuchanan11

    Ff Dynamics electric fans

    I had ff dynamics on my lbz never had a problem. The tuning tool is just a tiny screw driver that you can use to adjust when you want the fans to turn on.
  15. Bbuchanan11

    Tc shudder

    I’m in the same situation trans holds fine fluid is bright red but the converter shutters enough to set codes.. i know what I should do but my wallet is saying no lol
  16. Bbuchanan11

    Heater hoses at heater core with twins

    I picked up a truck with what seems to be a custom set of twins. Previous owner cut the ends of the heat core off I'm guessing because the hot side pipe would not fit.. I'm planning to take dash out and put a new heater core in it so I can obviously have heat in the truck. Can some of you guys...
  17. Bbuchanan11

    Does anyone know this truck?

    I thought they were totally different.
  18. Bbuchanan11

    Does anyone know this truck?

    Thank you I spent hours cleaning it when I brought it home. Both turbos were just rebuilt but when I went for a test ride it blew oil all over the windshield he said the intercooler needed cleaned out because of a bad turbo seal. So I took the intercooler out and all the pipes. I ended up taking...
  19. Bbuchanan11

    Does anyone know this truck?

    Thank you
  20. Bbuchanan11

    Does anyone know this truck?

    E mail sent.. thank you
Top Bottom