Search results

Search the forum Search Articles
  1. Harbin_22

    Cracked Piston

    FWIW Jon, the current engine in my truck has around 13-14k miles, been around 1,200hp for quite a while and beat on this thing constantly. Still going strong with your pistons!
  2. Harbin_22

    LBZ: Fleece transmission cooler lines

    My fleece lines developed a pin hole for no reason what so ever in one of the hoses about 6" from a fitting. I ended up ordering all the -10AN fittings and hose from summit and just used Fleeces fittings at the trans and coolers.
  3. Harbin_22

    Whats a good TPMS reset tool?

    I've got the Kent Moore EL-50448. Worked on my buddies 2016 Duramax and my 2010. Got it off Amazon, incase it didn't work, would be easy to return.
  4. Harbin_22

    Injector balance rate high on big injectors question

    If you've changed RP at idle, put it back to stock and see what they are
  5. Harbin_22

    2nd gear start help

    Well I guess I didn't read the description where it says under XX mph commands downshift. Wonder if you can go negative since EFI release the ability to go outside off set limits. I also had a 3rd gear start tune for pulling and it is completely fine. Doesn't hunt at all
  6. Harbin_22

    2nd gear start help

    The 2-1 should only be lower if you want it to downshift. I was told put all zeros in is the correct way, but I'm going to try going way up with the 2-1. If 2-1 is set at 200mph, in therapy, it should never try to go back down to first
  7. Harbin_22

    2nd gear start help

    So if you roll forward just letting off the brake, it will shift to second, you than have to give it some throttle so it will stay in second, and keep it constant or increase slightly to keep it in second. If you let off any once you are stopped, it will go back to first, and when you increase...
  8. Harbin_22

    2nd gear start help

    I've been meaning to play with it but, you will have to stay on the throttle, either constant or continue giving it slightly more throttle input or it will down shift to first and go back to second once you increase again. I think the 2-1 downshift should be maxed out so it never tries to...
  9. Harbin_22

    Billet Pans now at Limitless Diesel

    #GameChanger
  10. Harbin_22

    low idle lift pump pressure

    I had a similar issue. I had to turn my AD up a couple psi when I put the stroker pump on.
  11. Harbin_22

    Efi Dealers

    Hell I've been on the phone with Mark and gotten an email with new tunes during the conversation lol. Doesn't get much better than that!
  12. Harbin_22

    LLY: fastest stock block lly duramax.

    Who's trans do you have? MPH and time don't really add up for "normal" times. I've seen duraflight truck go 6.60@103, but 101 is usually good for a high 6.8-6.9. Definitely a weird slip for a full weight CCSB
  13. Harbin_22

    Oil level indicator

    Not a real big job to drop the lower pan and get it out. I would just for the piece of mind that it isn't in there
  14. Harbin_22

    LBZ: List of Best tuners for EFI live

    100% won't be disappointed with Mark's tunes and service during and after. So glad I got on board with him.
  15. Harbin_22

    Got the LBM motor in and running!

    Front cover/water pump stuff, elbow on the oil cooler to adapter housing needs to swap unless you switch to an LBZ coolant crossover with heater hose holes, balancer, flywheel need to stay on the engine, and reluctor wheel. That's about it
  16. Harbin_22

    Dual Fueler/10mm stroker pump surge

    Not a big deal to run a stroker/stock pump setup, takes a little regulator scaling to keep them happy
  17. Harbin_22

    Dual Fueler/10mm stroker pump surge

    Need to try it with one pump and see what happens.
  18. Harbin_22

    Limitless Trans Still Going Strong.

    I drive mine easy for a mile or two to get the trans up to temp to check it. After that it gets the gradual increase from 25% to 100% throttle learn time and let it have it after that, on the race tune the entire time. Evans trans are the shit! Can't believe all the abuse mine takes and keeps...
  19. Harbin_22

    VP Diesel Race Fuel?

    He might have some knowledge on the subject...
  20. Harbin_22

    Won't start after alternate fire cam

    Did you reuse the reluctor wheel from the broken crank? If so, was it chewed up any? When I broke mine, I had a very small knick in one tooth and my truck would do the same thing
Top Bottom