Search results

  1. Bonestock

    Rebuilding gt and gtx turbos

    If they are not willing to support you on such low usage than it sounds like a better time than ever to go Borg lol.
  2. Bonestock

    The build is a GO!

    Who did you decide on for your machine work?
  3. Bonestock

    LMM: New Danville 68MM Stg2R Review

    Damn it I was trying to stay somewhat stock. I have stock turbo, engine, fuel but reading this is going to net me a stage 2 charger and fuel upgrades. I had the fleece cheetah 63 billet with 45% sticks and an exergy 10mm pump. This setup ripped no doubt but it also ripped the needle off the...
  4. Bonestock

    New high capacity trim valve springs

    Mike L Springs installed. Much smoother operation. I really notice also while slowing down trans shifts down nice and easy. The 4-3 rough down shift is history. Highly recommended!
  5. Bonestock

    The build is a GO!

    Sweet deal man. You must be selling Meth to have all those parts showing up lol!
  6. Bonestock

    C5 clutch stack height difference

    Mine measured .183 from tab in case to apply plate. The actual clutch pack clearance measuring from bottom of case after 1000 miles was .085. I believe I am .005 on the tight side. I spoke with Mike and he said its good to run it. I did this before I had talked to Mike so I never got to...
  7. Bonestock

    The build is a GO!

    Are those jugs behind the cherry picker for the next trans or converter swap? I have similar looking stuff in my garage lol.
  8. Bonestock

    New high capacity trim valve springs

    How do you like the r converter so far?
  9. Bonestock

    New high capacity trim valve springs

    parts Just installed the Mike L cooler on my old mans Lily. Great fit very nice piece! Also pulled the valve body in the LMM and installed these springs. Wont get to drive it till my Goerend R Converter shows up. Thanks Mike L!
  10. Bonestock

    Lmm boost leak or up pipe leak?

    More often than not on the two piece Y bridges LBZ and LMM the Orings won't hold much boost. Thats where I would be looking. Pressure up the system. YOu can start low 10psi and increase as needed to hear / feel the leak if there is one. Good luck, I went thru this more than once with a LMM and...
  11. Bonestock

    After 6 speed build no lockup?

    Cool deal. This will be the one.
  12. Bonestock

    After 6 speed build no lockup?

    Well I have a strong feeling my converter was the issue of not locking up. I have a very loose converter and while scanning turbine rpm and output shaft rpm there is a minimum of 550 rpm difference. From what I have learned is that no way the converter will ever lock with this rpm difference...
  13. Bonestock

    Injector harness or bad injector?

    Update it too an Lb7! Now is the time lol!
  14. Bonestock

    6.7 PStroke

    Also power steering pumps blow. This doesnt have anything to do with 6.7 because my 6.2 Ford 350 gas truck also had a seal blow out on it. Out here in the sticks when you get stuck in a rut and try to get back on road with wheels at full crank and put your foot thru the radiator almost...
  15. Bonestock

    New guy out of Wyoming

    Welcome I too am from Wyo. Worland....
  16. Bonestock

    After 6 speed build no lockup?

    Exactly what parameters need to be met in order for the tcm to issue the lockup command? Is this throttle position and rpm or psi or?
  17. Bonestock

    After 6 speed build no lockup?

    I am just thinking out loud here about my tcc not locking up. With me being able to lockup the converter manually with the scan tool isn't that the same electronic circuit that the tcm would use to command the solenoid to function? If so wouldn't that prove my wiring and solenoid to be okay...
  18. Bonestock

    Anyone have a V2 with Cummins option? I need a favor

    I have a v2 optioned for both but no stock file and dont have a truvk avail @ the moment.
  19. Bonestock

    Compounds idea

    Wouldnt you need a T6 480 instead of the t4 footprint it is now? I loved my 66/80 setup. I have heard alot of good things about danville 72 / 483 setup with great driveabilty and big top end power. The setup you are talking about may be a bit lazy down low but with some good tuna may be sweet?
  20. Bonestock

    After 6 speed build no lockup?

    Well I got my hands on a Gennesys scanner and was able to monitor tcc command psi which was 0psi. Also was able to monitor tcc slip rpm and lock the converter. The converter would lock / unlock whenever the commands were pressed. The converter had 0 slip when locked. The fact that the tcc...