Search results

Search the forum Search Articles
  1. Bonestock

    6.7 PStroke

    My wife has a 13' King Ranch 350. It is a nice truck. I don't mind it @ all. It has hs and all deletes seems to get decent mileage. I may wind up buying one for myself someday but till then you can pry my Lb7 and Lmm from my cold dead fingers lol!
  2. Bonestock

    After 6 speed build no lockup?

    Yes,I will give this a try for sure.
  3. Bonestock

    After 6 speed build no lockup?

    Its actually a Modus. There probably is another way to make this happen other than the way I did it. I went into transmission functional tests and tcc on/off. I selected on and from that point the screen would lock and not let me scroll down to view slip values.
  4. Bonestock

    After 6 speed build no lockup?

    I was unable to arrow down to the slip rpm once I enabled the lock command. The screen was frozen once the command was entered. It was definetly a positive engagement going thru the gears.
  5. Bonestock

    After 6 speed build no lockup?

    Yes fluid temp was 153 f while testing.
  6. Bonestock

    After 6 speed build no lockup?

    I locked it manually with scanner and it seems to lockup. I was unable to log and lock with the modus but it sure seemed to lock.
  7. Bonestock

    After 6 speed build no lockup?

    Well I just got done with Modus. The tcc slip rpm would go up to 1000 rpm under light accellearation and commanded lockup psi never left 0 psi. I couldnt find any duty cycle info on tcc.
  8. Bonestock

    After 6 speed build no lockup?

    Cool, I will test this out with a Modis today. Thanks, Randy.
  9. Bonestock

    After 6 speed build no lockup?

    I didnt find any TCC Duty Cycle pids? I did find a TCC apply psi and it has never came off of 0psi.
  10. Bonestock

    After 6 speed build no lockup?

    No, I have an EFI known good lockup tune with stock precision ml. I also ran stock tcm tune. No lockup whatsover in 700 miles of light driving break in trans on ice roads lol. I am trying to get my hands on a Tech 2 to troubleshoot this thing but no avail within 100 miles of where I live in...
  11. Bonestock

    After 6 speed build no lockup?

    I will hit you up when I next make Casper!
  12. Bonestock

    After 6 speed build no lockup?

    Good deal that makes me feel better for now. I was thinking I should be 280-300 psi. I will call tommorrow. Thanks Mike.
  13. Bonestock

    After 6 speed build no lockup?

    Sounds good. I was just going off holding psi in efi logs.
  14. Bonestock

    After 6 speed build no lockup?

    I will call tommorrow for parts. Thanks!
  15. Bonestock

    After 6 speed build no lockup?

    Converter slip rpm was high like 1000rpm wot and psi on holding was only 232 psi. Command is 0 psi wot on tcc lock.
  16. Bonestock

    After 6 speed build no lockup?

    Hello all, I had purchased a Suncoast Gmax 6.3R Kit and did alot of reading and research before I took this on. I visited with George from Suncoast and many others and was very careful to clearance everything out properly. I followed the Suncoast directions spec sheet and here is what I had...
  17. Bonestock

    Lobe lift vs valve reliefs

    Double stack your head gaskets lol!
  18. Bonestock

    I wish GM would release a 1/2 ton diesel!!

    6 in a row makes em go. 8 in a V makes em flee!
  19. Bonestock

    Ready to replace Allison rear housing

    Pull it for sure. No way of keeping torrington bearing in place while in horizontal position. Get vertical with it.
  20. Bonestock

    Help me pick a turbo

    100% opposite opinion here. If it were up to me it would be 475/stocker compounds no question. I have had 66/80 compounds and singles. The compounds will be much better for low egts and towing. Singles are ok but no comparison for the power level and description of what he wants to do with his...
Top Bottom