Search results
-
P0606
Alot of times related to the weather for that code. How cold is it up there? any moisture on or possibly in your ECM?- MMLMM
- Post #2
- Forum: Duramax Tuning, Logging, and Gauges
-
EFILive name on bottom of speedometer
Actually, you can do it to the real way, it requires a cluster reflash, but who that F wants to spend money to change that.....Oh and it wasnt photoshop, I just couldnt find a link to download MS Paint :D -
EFILive name on bottom of speedometer
Ok, here is how you do it on the LMM, the cheapest way I know. Someone in this thread already called it :D here is the software required software -
Free 1 year NRA memberships
Already a member but hell yea, everyone should sign up with if its free. No Excuse now!- MMLMM
- Post #2
- Forum: Smoke Signals
-
Route exhaust up without a stack
a 45° that fits over and about 6" of pipe welded to that, then drill hole through your pipe and this device and slap a bolt through for the track...- MMLMM
- Post #4
- Forum: Duramax Hard Parts
-
LMM/LBZ Intake Heater Delete Spaces
Matt, I didnt take pics as I did mine, because I was jsut screwing around one night and had it together, I always think about pics after I am finished doing a project...lol Empty :D- MMLMM
- Post #17
- Forum: Duramax Hard Parts
-
LMM/LBZ Intake Heater Delete Spaces
Monday I go down to pick up the first 5 lol. Then I will test FIT all of them Monday at my hose, package them up and hopefully ship Tuesday morning. If they are done and everything goes as planed thats how it will go down. I'll start second batch Monday as well and have ETA for those Monday...- MMLMM
- Post #14
- Forum: Duramax Hard Parts
-
LMM/LBZ Intake Heater Delete Spaces
It is very restrictive. The ones am making are matched to the 2 intake pieces to allow a nice straight flow design and not just an open spacer thet leaves open space with "walls" for the air to hit. Can someone post a pic of the grid lol. I dont have mine anymore lol There $30 shipped...- MMLMM
- Post #12
- Forum: Duramax Hard Parts
-
LB7: is my oil pressure low?
I use a digital gauge and it shows oil psi, at hot idle its like 18psi. Its been like that ever since I bought the truck, even before the syn. switch. over. -
Shamwow guy arrested after hooker bites his tongue..
sounds more like a slut-chop than a slap-chop... that guy must do drugs, he looks pretty rough in the mugs...- MMLMM
- Post #4
- Forum: Smoke Signals
-
twin cp3 question????
I'd put the LB7 cp3 at the pully location, since its older and it will might fail or wear out and it will be a ton easier to swap out.- MMLMM
- Post #17
- Forum: Duramax Hard Parts
-
LMM/LBZ Intake Heater Delete Spaces
you still need to space it.... ;)- MMLMM
- Post #6
- Forum: Duramax Hard Parts
-
LMM/LBZ Intake Heater Delete Spaces
Official Post to not fill up the other one. Ok so the heater grid is pretty much useless in warmer climate trucks, race trucks, and even the trucks that dont get cranked over in the cold. The air intake heater grid comes on for a few minutes during warm-up, when the temp outside is, IIRC...- MMLMM
- Thread
- Replies: 40
- Forum: Duramax Hard Parts
-
EFILive name on bottom of speedometer
Ahahahaha, this thread kills me... come on guys do you really want to be just told how to do it? You wont be surprised when you find out..... -
Cheap LB7 Intake Heater Delete
yes the ones I make are nice and clean, and cut on the waterjet. The thread is mostly talking about the delete for LB7, Mine are for LBZ/LMM trucks. -
Stock fuel pump?
X2, lets get like 30 people on board, then when one hangs up, he lets the next guy know to call....:rofl: of course, asking should I use #1 or #2 diesel in my truck might throw thow them off for a couple hours- MMLMM
- Post #16
- Forum: Smoke Signals
-
Cheap LB7 Intake Heater Delete
below 40° degree it is used. It wouldnt effect start up as theres no air moving through until running. It might take a little longer to warm up, and if its real cold out side, it may not keep the IATs up to a reasonable temp when Idleing..... -
Cheap LB7 Intake Heater Delete
I made a IAH delete spacer (this is a rough one I made. But I am having ome cut on a water jet that will be a nice easy bolt in on LBZ/LMM, you need to shut code off with EFI live. I've ran mine for weeks now with no issues and seems to be better... here is a pic of the one I made, the ones I... -
Whats efilive with a license worth
you could sell it for 600 pretty easy, 500 it would go pretty damn fast..........- MMLMM
- Post #7
- Forum: Duramax Tuning, Logging, and Gauges
-
Stock fuel pump?
what dealer, I wanna call them and talk to there service one afternoon of drinking, it will be fun.....- MMLMM
- Post #11
- Forum: Smoke Signals