Search results

Search the forum Search Articles
  1. 1SloLMM

    Leaf bushings

    I'm sure any dealer would have them. I got mine from the shop that works on my truck but a local semi suspension place had them in stock too. I just told him I need the bolts for the front leaf spring bushings and he looked it up in a minute
  2. 1SloLMM

    Leaf bushings

    Just cut the bolts on both sides and either drill or burn out the rubber part and cut the sleeve out. Only way. Get a really hard bit if you drill them, I snapped two right away. I just went through this. I got prothanes to replace them. Urathane parts goes in by hang and just tap the middle...
  3. 1SloLMM

    Manifolds or just up pipes

    What kind of power do you want to make? If its not much over stock just buy an lb7 passenger side up pipe and call it good. If you buy up pipes your into it 600 bucks so why not spend 350 more for both. I got lucky and found a used set for 600
  4. 1SloLMM

    what converter

    I have a goerend h converter I'd sell ya. Billet stator gotta find out the stall though. Probably close to a 1056
  5. 1SloLMM

    Cheap tranny build?

    Well I have a used goerend h converter I'd sell ya for a good price. 800 shipped
  6. 1SloLMM

    Cheap tranny build?

    If you could take it out and install it yourself you could be under 4k. couple hours at 95 an hour shop cost
  7. 1SloLMM

    Broke 700 ponies this weekend.

    Yes it is red. Wish I could of made it to NDS But I need a job lol
  8. 1SloLMM

    almost made it

    Where will you be working out of in NE? If your going to be in Lincoln or omaha you should bring your truck with and hook up with the guys at Husker Diesel. Justin Hyatt just put down 1457 on fuel with his new twin setup at No Zones Dyno event
  9. 1SloLMM

    1058 With 475 Single Issue

    Damn I wish you would have done this a week ago. I would of bought your 1058 instead of the new one off of husker. I assume that's where you got your 1053?
  10. 1SloLMM

    Carbon Stack Discoloration

    Looking at buying a used carbon stack. Old Skool Fab with the white in it. It has a brown burnt discoloration to it like it got too hot. Is it the clear coat usually or is it the resin and it can't be fixed?
  11. 1SloLMM

    Lbz duramax or lmm!?!?

    Efi for tuning. Either pump is fine. I have mbrp dp and 5 in exhaust and it sounds nice and deep. You get rid of the dpf with turbo back exhaust. Block the egr.
  12. 1SloLMM

    Lbz duramax or lmm!?!?

    Basically the same thing once deleted. Choose the body style you like more. I like my lmm better based on the interior and exterior looks/comforts
  13. 1SloLMM

    Tire and rim diameter, width, and weight at the strip

    Well doing more research I'll be going with the proxes since I emailed nitto on the 275/60r17 420s and they weigh almost 10 lbs more per tire then the 285/60r17 proxes II's. On to a wheels thought, will a rim with an +18mm offset help control toe in on a launch and higher hp trucks going down...
  14. 1SloLMM

    Tire and rim diameter, width, and weight at the strip

    Are you referring to the ST II? I thought they were crap compared tho the origional ST? Only ziex tire I can find is 18+ on rim size
  15. 1SloLMM

    Tire and rim diameter, width, and weight at the strip

    I will be buying a reg cab soon and making it into as much of a street/strip beast as much as I possibly can. I am looking into how to lighten everything as much as possible and which on the rim and tire side of things it looks like the only weight savings can really be had in the rim. With...
  16. 1SloLMM

    Remote start

    I have the Viper Smart Start. Set on 15 second delay but I dont know if it has a high idle option. probably just have to get high idle setting on your switch unless your truck has the factory option. Very nice remote start. It will cost 500-550 and a small yearly cost, but you cant start it from...
  17. 1SloLMM

    Converting a DRW to SRW

    Take the adapters off the front and I believe change the rear end because its a couple inches wider. Ive seen a couple trucks if you get the right offset wheels the front and back aren't too far off
  18. 1SloLMM

    Wheel and tire weight reduction effects

    I would say it would help a lot. 3 lbs or rotational weight is equal to 1 hp gain is the general theory I`ve always been told. Especially if you drop all that weight and go to a smaller diameter setup you will definately feel a difference.
  19. 1SloLMM

    Cab lights

    I only took a basic intro to body work class but couldn't I just take the head liner down and tack a small piece of metal under the hole and slowly plug weld it and be careful not to warp anything? Then just sand and bondo smooth and paint it? I've seen the smoked or blacked out ones but I much...
  20. 1SloLMM

    Looking for a mobile dyno

    JBI not offer theirs up?
Top Bottom