Search results

Search the forum Search Articles
  1. 1SloLMM

    Stuff to do around Phoenix

    Visiting some family in Mesa and was just wondering what there is to do around here. Any secret places to eat that are good? Are there any tracks that have any driving experiences that aren't outrageous in price? Also would like to do some off road stuff. Staying in Scottsdale so we're close to...
  2. 1SloLMM

    Batteries

    Die hard platinum from sears are oddesseys relabeled. Kinda spendy but worth it. I've also bought an exide from Menards. 100 bucks for the middle one but has a 94 month warranty with it if I remember right
  3. 1SloLMM

    Brake upgrades

    I bought Russell's braided lines I see it replaces the soft lines just in the 4 corners, has anyone has a braided line made for the soft line from the frame to the center of the rear axle that splits to each side?
  4. 1SloLMM

    Pitman arm

    All rare parts here too with the dhd brace. Very nice stuff but I came from completely worn out stock stuff
  5. 1SloLMM

    Removing wiring

    Just To the module? And then the bigger wires to the plugs themselves are separate correct? From what I've read there's still no easy way to get rid of the module itself without rigging a resistor?
  6. 1SloLMM

    Removing wiring

    Yes, I understand to that. I am wondering what goes to those two bale connectors that I could remove and then what all goes around them before I start cutting all the protection off. Does everything having to do with the motor go to those two points except the glow plugs, grounds, and the...
  7. 1SloLMM

    Removing wiring

    I have been removing components from under the hood and I was just wondering if anyone knew where certain things are wired too. Mostly looking into all the egr related plugs, WIF sensor, maybe the AC plugs also. Which are wired into the motor harnesses, and which go straight to the fuse box?
  8. 1SloLMM

    Have you guys seen this monster?

    80 to 90k I believe and they ran it at a track for publicity and now you won't even be able to go to a track and run it once because it was in the 9's and they don't have cages
  9. 1SloLMM

    LBZ: ECL P0299 under boost

    Build a boost leak tester. Take the boot of the outlet of the compressor side and find a pvc pipe cap that will fit. Drill a hole in the top and put and air chuck in it. Don't go over 40 psi
  10. 1SloLMM

    Fuel cell

    To not start a new thread, how does everyone think this would work out? http://www.rhodesracecars.com/1969-Chevy-Camaro-Aluminum-Fuel-Tank_p_12042.html I have been looking for a cell but all of them are so deep they fall below the rear bumper. This one has the capacity and sump without the...
  11. 1SloLMM

    Frame measurement

    Thank you
  12. 1SloLMM

    Frame measurement

    In the process of reconnecting my frame rails after removing the spare tire holder. Before I weld this tubing in can anyone get me the measurement for the width on the end of the rails? I don't see how they could have spread or narrowed but just want to make sure. I have 42.25 outside to...
  13. 1SloLMM

    Reverse leveling ideas

    I got all my stuff from http://www.autoandtrucksprings.com. I believe the alignment bolts are 3/8 and the stock u bolts should be good to use again unless the are really eaten up from over the years.
  14. 1SloLMM

    Trans Crossmembers

    Anything new?
  15. 1SloLMM

    Hey Nerds......Wireless Charging

    If there isn't a physical way I seen a card you can plug into the charge port and it just wraps around to the back of your phone and sits inside your case. Makes it a universal wireless charger
  16. 1SloLMM

    Hi!

    How could you ever move away from here? Get past the sewage smell and the never ending construction for a 3 lane interstate we don't need, theres a whole lot of nothing to do. lol
  17. 1SloLMM

    3" djm lca

    If you want to stay at the height your at you'll probably have to cut off the lca stop on the frame. Had to cut it off for coilovers and it's way lower then stock without hitting anything
  18. 1SloLMM

    2017 Duramax

    I bought a 17 half ton but I bought the gm mats. They redesigned them to basically follow the cab and kind of designed to get any liquid out the door. The drivers side also utilizes the little hold down tabs.
  19. 1SloLMM

    Weight Transfer 4wd launch

    I believe the 501 for the front and 901 for the rear if your truck is close to stock height or a little lowered
  20. 1SloLMM

    Wheels

    MBmotorsports. Got my 18x9 352s for 150 a piece. Pretty light too. The TKOs are light also
Top Bottom