So I'm trying to put these caltracs on and my problem is this...
My front leaf spring bushing bolts are seized in there all together. The bolt spins but won't come out of the bushing. I've tried pounding it out with a hammer after a few days of soaking it in pb blaster and still no dice.. I'm really hoping I don't have to cut them but if worst comes to worse I will... Any tips? If I do have to cut the bolts out what size do I need to replace them?
Also to be clear its both sides. I'm not hitting the tank on the drivers side bolt just so nobody thinks that's the problem.
My front leaf spring bushing bolts are seized in there all together. The bolt spins but won't come out of the bushing. I've tried pounding it out with a hammer after a few days of soaking it in pb blaster and still no dice.. I'm really hoping I don't have to cut them but if worst comes to worse I will... Any tips? If I do have to cut the bolts out what size do I need to replace them?
Also to be clear its both sides. I'm not hitting the tank on the drivers side bolt just so nobody thinks that's the problem.