Search results

Search the forum Search Articles
  1. 1SloLMM

    LMM: 1/8 mile time

    Took my 09 once and did 8.34 without changing a thing from the street and pulling a car there.
  2. 1SloLMM

    Trans Crossmembers

    Anything new yet?
  3. 1SloLMM

    Rear set up

    Ttt
  4. 1SloLMM

    Need help I'm stranded

    You can hear the pump running? No leaks? If the lines are backwards I can't see you pulling fuel through the regulator. Maybe it's just sucking the little fuel left in the line from before installing the pump. I put mine right under the stock pick up/sending unit and haven't had problems. I...
  5. 1SloLMM

    Need help I'm stranded

    Maybe check the fuse you used to plug the pump to? A few of them are ignition that could be killing it
  6. 1SloLMM

    Rear set up

    In the process of redoing the rear shocks. Anyone have any opinions or see anything I should change? Mounts in the axel are 10* forward to compensate for drop hangers and then a little for torquing.
  7. 1SloLMM

    Is there a too low?

    I don't believe a body drop is an option since it was raised in the first place to help clear the intercooler/bigger rad. How do I get it lower without using spindles if I cant safely get a shorter shock for the coilovers? Does anyone know if Brian changed his LCA to pull the spindle back in...
  8. 1SloLMM

    Rear frame C notch

    What do your angles look like?
  9. 1SloLMM

    Rear frame C notch

    Kind of off topic, but I don't have a problem doing this but I was wondering if any of you higher hp 4x4 are having any trouble keeping the front end together? Cv's mainly when you get them fairly negative since much past the 3" will put you in that situation?
  10. 1SloLMM

    Is there a too low?

    Does anyone know of someone moving the front diff up to achieve better cv's or is it just not worth the time and just set it to where it will work best without breaking stuff?
  11. 1SloLMM

    Is there a too low?

    I don't mean it as they are bottoming or maxing out, just that I cant go any shorter or they will be in that situation.
  12. 1SloLMM

    Is there a too low?

    Looking to just add the hangers and spindles. Probably a little more then a 3/5 drop now. As it sits now:
  13. 1SloLMM

    Is there a too low?

    I need to do the spindles because the coilover set up I have already has too little of travel. The CVS are level right now so a little negative won't hurt since the front end will come up during launch. The rear I'm mostly wondering aboutcthem drive shafts. Is it designed to work completely in...
  14. 1SloLMM

    Is there a too low?

    May be a dumb question, but is there a certain point where lowering the truck too much becomes a problem? Trying to get the stance all worked out this year. I currently have 2 leafs and shackles in the rear with caltracs and coil overs up front with djm lca. Looking to do the mcgaughys drop...
  15. 1SloLMM

    Is anybody running a single battery if so any one in particular that works well ?

    I use a single diehard platinum on my lbz but it the group 31 marine battery and weighs 75 pounds but has 1150 CCA. Put it in the way back to put more over the rear wheels. I also have two of the stock size in my lmm and they never have given me a problem starting even after sitting for a...
  16. 1SloLMM

    Stack kit

    Cab noise is bad at certain rpms but you will get used to it. Gave me a headache the first day and the passengers dont like it but I have a stripped interior. Heard it helps a lot of the stack is taller than the cab. Color matched one I have
  17. 1SloLMM

    Boost leak test- hot side pipe ID?

    Just go buy a couple pvc caps, drill a hole in the end of the one that fits, and screw an air chuck into it. Regulate your pressure off the compressor
  18. 1SloLMM

    lowered truck pics

    When I bought it Now [/IMG] 3 inch shackles with only two leafs. Front coilovers with djm lowers. Don't know exact drop but I'd say 4/5. 6" from fender to tire all around. 31" tire
  19. 1SloLMM

    Fuel supply hardline replace w/ AirDog2 hose

    From sump to pump in the suggested mounting place, and from there to quick connect area with extra. May have had enough for the return also can't remember right now. They had 5/8 line on the pickup already so I think I just used a barbed adapter for that also. This is on a regular cab, I don't...
  20. 1SloLMM

    Fuel supply hardline replace w/ AirDog2 hose

    I had enough from the sump to the quick connect. I went 3/8 line from there straight into the cp3. Got a -8 female push loc, -8 to -6 adapter, and then -6 pushlock for the line to the cp3. Also was helpful to prime. Just loosened the fitting right there. I don't recommend getting the half inch...
Top Bottom