What did you do at work today?

malibu795

malibu795

misspeelleerr
Apr 28, 2007
8,240
550
113
42
in the buckeye state
DMAX Slim said:
McRat said about Casper "you can't buy memories, you have to make them". That applies to everything, the customer that brought this jackstand in knows it can be fixed here or he wouldn't have brought it and he knows he can buy a new set cheaper than fixing this one. He said 5 words that made me want to fix it for him to the best of my ability. He said "they belonged to my dad". I should have wanted to fix it and give the customer what they wanted instead of trying to get him a new set made overseas. I learned something from him this week and that is give the customer what they want even if you have a cheaper solution. He ask me to beef it up and do the other one too. I pray that my kids respect me enough to where they think about me the way this man thinks about his dad when I'm gone. I know I respect my dad this way and he's still here.

Sent from my iPhone using Tapatalk
Click to expand...

I've been there.. though I don't find it disrespectful to let the customer know there's other options.
Definitely respect fixing stuff on sentimental value.
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,683
5,838
113
Phoenix Az
malibu795 said:
I've been there.. though I don't find it disrespectful to let the customer know there's other options.
Definitely respect fixing stuff on sentimental value.
Click to expand...

yup, x2



BTW Slim, did you put some kind of added structure up the insides of the uprights? id be worried about the steel being weak now after bending, heating and rebending it. thats assuming hes going to put heavy loads on them. hell of a job bringing them back though!
 
six5creed

six5creed

Member
Jan 6, 2016
1,046
58
48
N.C.
Chevy1925 said:
yup, x2



BTW Slim, did you put some kind of added structure up the insides of the uprights? id be worried about the steel being weak now after bending, heating and rebending it. thats assuming hes going to put heavy loads on them. hell of a job bringing them back though!
Click to expand...



Thanks James. Yes, I put some 5/8" round rods inside. These things are rated for 6,000lbs. I wouldn't trust them at that though.

5e52251128c7aa0960917ee2281f8c74.jpg



Sent from my iPhone using Tapatalk
 
Dozerboy

Dozerboy

Well-known member
Jun 23, 2009
4,892
470
83
TX of course
That looks cool is it going on your truck? I want to see pictures of it installed. You may have to make me one.


Sent from my iPhone using Tapatalk
 
WolfLMM

WolfLMM

Making Chips
Nov 21, 2006
4,005
26
48
38
AL
DMAX Slim said:
Drilled and tapped some holes in 304 stainless for a customer who did the lathe work themselves. I noticed the chatter in the bore and looked at the print and wondered how they held the tolerance with it looking like this. Then I measured it and figured out they don't know how to read prints either, whew. Looks like they may have tried a straight knurl tool to try and tighten it up, lol. #2 looks a little better but it's still to big.

94b4958a469b78eb76b2b443d0c3ecac.jpg


69e9e9a3ddf276fc4b92d27af9565510.jpg


e45b9aad8f36bb41db58817748bfa514.jpg


8cea516a298549a8ddee7c2c63c74f87.jpg


Sent from my iPhone using Tapatalk
Click to expand...

Jeezus
 
Novak

Novak

SQUIRREL TRYN TO GET A NUT
Jun 15, 2015
990
0
16
Cloud 9, IDAHO
Dozerboy said:
That looks cool is it going on your truck? I want to see pictures of it installed. You may have to make me one.


Sent from my iPhone using Tapatalk
Click to expand...



Yesir I could do that!
I'm gonna order in some 3M 1080 so it lays down a lot easier and lasts a lot longer.


Sent from my iPhone using Tapatalk
 
WolfLMM

WolfLMM

Making Chips
Nov 21, 2006
4,005
26
48
38
AL
LS motor torque plate. Starting out with no hole and ending up with 4.170 hole.
Only running 150ipm truemill wanted to run 375ipm, I was scared the workpiece would move..


[YOUTUBE]rxSOrsZXxAc[/YOUTUBE]
 
Burn Down

Burn Down

Hotrodder
Sep 14, 2008
7,092
28
48
Boise Idaho
WolfLLY said:
LS motor torque plate. Starting out with no hole and ending up with 4.170 hole.
Only running 150ipm truemill wanted to run 375ipm, I was scared the workpiece would move..


[YOUTUBE]rxSOrsZXxAc[/YOUTUBE]
Click to expand...

I don't know why but those CNC lathes and mills just fascinate the shit of me:thumb:
 
You must log in or register to reply here.
Top Bottom