What did you do at work today?

jlawles2

Well-known member
Jan 28, 2010
1,057
39
48
Danbury, TX
Little lift.

Worked on this lift about a week ago. Have not had time to post the pic though. Was supposed to be 600 ton, but came in just over 500 ton. Thing we lifted was the center section between the towers. Client had the roof trusses where our equipment was sitting.
 

AJH

Member
Sep 7, 2015
257
0
16
Memphis TN
Friday
3 man crew from 10am till 330pm minus a 1 hour lunch.
Set 13 45' poles 2 50' poles and 1 55' pole.
 

jlawles2

Well-known member
Jan 28, 2010
1,057
39
48
Danbury, TX
No. That's at the NASA complex inside the Redstone Arsenal in Huntsville, AL. It's a test stand for the liquid hydrogen tank for the new SLS. That structure is only about half the height of the VAB (been in the top of the building). If you look up the Saturn 5 Rocket test stand, this thing is just East of that inside the same fenced area (34°37'56.44"N, 86°40'15.80"W). From the top of the structure you could see all kinds of neat stuff. Even the dust clouds when they were setting off ordinance on the base.:)

Missed the lifts in Texas with our 1200 tonne crane setup with 120m (yet is correct 394') of main boom.
 

six5creed

Member
Jan 6, 2016
1,046
58
48
N.C.
Been messing with my wife's '08 Yukon Denali. The air bag light is on. I had the neighbor in the auto shop scan it with his Snap-On and it says front sensor, position 1. Can someone tell me if this is the drivers side front at the bumper? What is the proper way to replace the sensor, unhook the battery and let it sit for a couple hours or what? I've never changed one and don't want to set em off.
 

malibu795

misspeelleerr
Apr 28, 2007
8,231
548
113
42
in the buckeye state
20,000lbs
14691414_10209769676852211_9123372398089225092_o.jpg

Inadvertently testing torsional strength.. 3'*6'*8,000lbs.. for those unfamiliar, a steel would have 2-3x the twist with 1/2 the weight
14720519_10209776629266017_7124870320806291922_n.jpg

19,000lbs
14656381_10209749544748921_1340046113715592863_n.jpg


Picked up new LML 2011 booster as mine is weeping worse in the cab...
 

Bustedknuckles

Honey Badger
Sep 25, 2010
1,308
2
38
33
Hagerstown MD
Been messing with my wife's '08 Yukon Denali. The air bag light is on. I had the neighbor in the auto shop scan it with his Snap-On and it says front sensor, position 1. Can someone tell me if this is the drivers side front at the bumper? What is the proper way to replace the sensor, unhook the battery and let it sit for a couple hours or what? I've never changed one and don't want to set em off.
Yes thats the one at the bumper. Just unplug it and plug the new one in. Just did one 3 weeks ago. You can unhook the battery if you want to be safe.
 

Dozerboy

Well-known member
Jun 23, 2009
4,892
470
83
TX of course
Yesterday I had a 3hr meeting/brickerfest with facility operations because they don't know the requirements of there own work permits. It had my crew twiddling there thumbs for 2hrs after a late start due to no one forwarding me the results of an Asbestos test.

Thanks to that my pre work paper work went from 20mins to just over an hour before our equipment can start digging.

Sometimes I wonder why I just don't got back to just operating equipment...


Sent from my iPhone using Tapatalk
 

hondarider552

Getting faster
May 28, 2008
10,627
2
36
34
Arizona
Hauled one of our grove 150RT's up to the tip of the San Francisco peaks wednesday, flagstaff AZ. 12,380 feet. Replacing the ski lift system before the snow hits.
 
Last edited:

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
15,610
1,865
113
Mid Michigan
Last workday until a week from Monday. Yay!

Christmas Season is just around the corner.....