Chevy1925 (James) Truck/motor build

Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,681
5,831
113
Phoenix Az
single battery, not used daily, small drain on battery (try to keep a tender on it), and like albert said, heat and cold. just kills it after 3 years. rarely do i let it go dead, its usually got enough juice if i forget the tender for a couple weeks to start up but it cranks slow. im sure that dont help.
 
gmduramax

gmduramax

Shits broke
Jun 12, 2008
4,072
248
63
Nor cal
Chevy1925 said:
single battery, not used daily, small drain on battery (try to keep a tender on it), and like albert said, heat and cold. just kills it after 3 years. rarely do i let it go dead, its usually got enough juice if i forget the tender for a couple weeks to start up but it cranks slow. im sure that dont help.
Click to expand...

Ohhh single battery that makes sense I’ll shut up now :roflmao::hug:
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,681
5,831
113
Phoenix Az
Spent some time yesterday dailing in the tuning. Ran over to the mythical tuna mans house as well to see if he could knock the last little bit of “clatter” out of the tune. He found in about 2 min of driving :rofl:.

Took just a few revisions and you’d never know it’s built. Just got some maf limiting to play with, mpg tweaking and towing mpg tweaking.
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,681
5,831
113
Phoenix Az
Oh and i pulled out the sxe88 I got from Anthony. Was a brand new 72 he swapped wheels/covers with the 88s center section/turbine. I machined the backing cover so the 88 wheel fits in what was the 72s center section and put it back together. Wheel is dinged up so I’m going to pick up a new one and rebalance it. Little difference between a stock ihi and the 88 :rofl:

dd8c00c50575a9e01a276b366a62ba93.jpg

4fee6db133ffe5001fcea20969135001.jpg
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,681
5,831
113
Phoenix Az
She literally saw it sitting on my work bench as i was machining the backing plate and didnt say a word. So either

A, im going to hear about it after the kids go to sleep
B, ive some how become a master as hiding things in plain sight and my ninja skills have finally hit Samurai status
C, Shes given up on me and no longer asks questions she doesnt want the answer to :roflmao:

im going with C.


oh and im sure billet parts will go in sooner than later! Guess i should beef my flat bed up to be able to hold the Limo on it :rofl:
 
lutzjk913

lutzjk913

Well-known member
May 5, 2010
1,681
168
63
groveport, ohio
Chevy1925 said:
She literally saw it sitting on my work bench as i was machining the backing plate and didnt say a word. So either

A, im going to hear about it after the kids go to sleep
B, ive some how become a master as hiding things in plain sight and my ninja skills have finally hit Samurai status
C, Shes given up on me and no longer asks questions she doesnt want the answer to :roflmao:

im going with C.


oh and im sure billet parts will go in sooner than later! Guess i should beef my flat bed up to be able to hold the Limo on it :rofl:
Click to expand...

My wife has accepted the C mono also. Lol
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,681
5,831
113
Phoenix Az
Honestly I got yelled at more for the fact her Canyon sat outside for 2 months while I built the new engine and the limo sat inside. I mean, I’ve tried to talk her into giving me the dining room as more garage space or enclosing the patio for it but got told sternly “no”. Can’t say I didn’t try to make sure the Canyon stayed inside!

I just need a bigger lot....
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,681
5,831
113
Phoenix Az
Nnnnnnoooooooooooooo.

She did from 06 to 12 but always garaged otherwise. Literally made this garage fit it when we bought the house lol
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,681
5,831
113
Phoenix Az
lutzjk913 said:
Lol. Good

So when the limo isn’t tore down they both will fit in the garage?
Click to expand...

yes sir! its tight in there but we can get in and out of the trucks in the garage, just cant get in from the wall sides. ill take a pic when i get home. Garage door was raised 4", inset the wall at the back 4 ft (they has some weird ass nook in the dining room taking up precious garage space) and then set racking on one side of the garage for crap while my lathe, parts washer, welding table (<- that holds my plasma, jack stands, welding blanket, and chop saw) and press are on the other wall. Work bench, tool box, drill press, welder, vacuum, tool cart, and more storage is on the back wall.

there is 10lbs of shit in a 2 lbs bag in there but i refuse to park our trucks outside :roflmao:. im considering ditching a rack so i can put a mill in there too :D
 
lutzjk913

lutzjk913

Well-known member
May 5, 2010
1,681
168
63
groveport, ohio
Chevy1925 said:
yes sir! its tight in there but we can get in and out of the trucks in the garage, just cant get in from the wall sides. ill take a pic when i get home. Garage door was raised 4", inset the wall at the back 4 ft (they has some weird ass nook in the dining room taking up precious garage space) and then set racking on one side of the garage for crap while my lathe, parts washer, welding table (<- that holds my plasma, jack stands, welding blanket, and chop saw) and press are on the other wall. Work bench, tool box, drill press, welder, vacuum, tool cart, and more storage is on the back wall.

there is 10lbs of shit in a 2 lbs bag in there but i refuse to park our trucks outside :roflmao:. im considering ditching a rack so i can put a mill in there too :D
Click to expand...

Can’t wait to see this picture

My barn is a 24x34 and is at capacity imo.

I told my wife my next barn will be a 40x60 with 3 bays.
 
You must log in or register to reply here.
Top Bottom