Search results

Search the forum Search Articles
  1. 2004LB7

    Injector blowby LB7

    Can you run the engine without the valve covers on to watch for leaks?
  2. 2004LB7

    1/8 mile discussion and time slips post here!

    Updated
  3. 2004LB7

    06 with 80k on it. Drop in MPG

    We have several members in that area. Hold tight
  4. 2004LB7

    06 with 80k on it. Drop in MPG

    You should invest in a scanner with bidirectional controls so you can disable injectors and see if it's just one or all starting to go bad. Lots of other good functions you can do with them too You can possibly see if you live near someone with the tools that would be willing to hookup to it...
  5. 2004LB7

    September '24 Chat -- School's In!

    I enjoyed reading about the dumpster back in the day. Such a big departure from the norm. Didn't it constantly have transmission issues or burn through clutch packs often. Shout out to @JoshH 📣
  6. 2004LB7

    September '24 Chat -- School's In!

    So are you saying this little boat is more capable then your dual Duramax turbo powered 1800 HP beast? 😛
  7. 2004LB7

    Starfire Fluid Built Trans

    Looks like it almost matched RedLine Source: https://youtu.be/zwqt5vI0o1A And one for ATF too. Doesn't look like Super Tech did as well here. At least for wear Source: https://youtu.be/mF2jlNc9Tqw
  8. 2004LB7

    Slow to turn over...

    Check the connections and cables for tightness or corrosion
  9. 2004LB7

    LB7 Fuel Filter Issue?

    There are several areas on the filter housing that are known issues. The primer seals, bleed screw, heater connection seal and lastly the housing can crack. All or any one of these can cause air to get into the fuel system and reduce the pumping capacity of the CP3 causing a low pressure code...
  10. 2004LB7

    Starfire Fluid Built Trans

    Project farm also did some testing on various oils. Well maybe not the best testing it did show that supertech did hold it's own against the other name brands. Didn't come out on top but beat out many others. I have no issues using or recommending it for when it's appropriate. I don't use it as...
  11. 2004LB7

    T87 Swaps

    I solder all my larger connections because I don't have a big enough crimper 😂
  12. 2004LB7

    Axle keeps coming out of the cup

    Had that happen to me several time until I put a bigger spacer in it. Double check the depth the the tripod extends into the housing. If it sits close to the opening then ot will pop out when under stress. Only took about 1/2" more thickness on my spacer to prevent it from happening again. Just...
  13. 2004LB7

    LLY Ficm

    Definitely helpful when you need to hook the scope up and see what it's doing while the engine is running. Plus you can see all the pretty lights on it 😁
  14. 2004LB7

    LLY Ficm

    Little more cruising around the neighborhood with the FUCM board after fixing some little issues and making some minor changes to the board. Running pretty good now. Very drivable. Almost like stock. Most might not even be able to tell the difference Source: https://youtu.be/GUskKERdNHE And...
  15. 2004LB7

    Lb7 p2146 p0206 p0204 p0201 p0207

    Need to check inductance with an LCR meter. You can check it through the FICM harness. If an injector is half shorted out it may read ok on the ohm test but not for inductance I'd also check that you have power on the bank one supply line since all the bank one injectors are affected
  16. 2004LB7

    September '24 Chat -- School's In!

    It's coastal so it only makes sense that it's sandy and unstable. Doesn't stop people from building and living there. Then they complain when the land shifts
  17. 2004LB7

    September '24 Chat -- School's In!

    Typical California weather. We survive just fine. Not unusual for us to have the last rain in May and nothing again until late October.
  18. 2004LB7

    What's up.

    Welcome
  19. 2004LB7

    Injector blowby LB7

    Compression test?
  20. 2004LB7

    September '24 Chat -- School's In!

    Supposed to be 104° today, 106° tomorrow and 104° again Friday here I found the best way to acclimate is to not sleep with the AC running. Some people can't do it. But really it works well. Also not turning the AC on right away but let it get uncomfortably hot then only set the temperature to...
Top Bottom