Search results

Search the forum Search Articles
  1. 2004LB7

    August '24 Chat -- Its too damn hot!!

    Source: https://youtu.be/13LaTffG1K0
  2. 2004LB7

    August '24 Chat -- Its too damn hot!!

    Another option could be those mini shells. Supposed to kick less. But 20 gauge is also an excellent option
  3. 2004LB7

    1/8 mile discussion and time slips post here!

    Updated
  4. 2004LB7

    LLY Ficm

    I think it's because the fuel line is not hooked up 😛
  5. 2004LB7

    LLY Ficm

    Just to keep you on your toes. Still working on some bugs in the code with having two pulses per injection. So this is a no pilot tune running on our board. Sorry for the vertical video Source: https://youtu.be/iEtQUWgk6N0
  6. 2004LB7

    Injector rates help

    That should give you the main rate. Read the balance again with a fully warmed up engine and give us the numbers with main rate
  7. 2004LB7

    T87 Swaps

    Jonny Cash has a song about that 😁
  8. 2004LB7

    Injector rates help

    How are you reading the balance rates? The scanner that can read balance rates should be able to show main rate
  9. 2004LB7

    Injector rates help

    The specs are + or - 4 in park or neutral and + or - 6 in drive not moving foot on brake. Both tests done with engine fully warmed up These numbers are also adjusted based on main rate mm3. So we need this number to know if your balance rates are any good
  10. 2004LB7

    Me

    Welcome. If you haven't already, replace the EDU fuse with a 10 amp
  11. 2004LB7

    Trans tune vs shift kit

    I may be wrong, but for your transmission, a tune is for shift points and converter lockup. This can help keep the engine in its power band. Reduce stress by using less torque and more RPM The transgo jr and springs are to help the transmission hold a tiny bit more power. It might help it live...
  12. 2004LB7

    LBZ to LMM swap??

    Yep. Use your harness and it will be plug and play
  13. 2004LB7

    Injector blowby LB7

    What about the hold downs? Bent? Are all the discs in place?
  14. 2004LB7

    LBZ to LMM swap??

    It's been clarified above that the LBZ and LMM injectors are the same size. Plug has a little tab that keeps them from being swapped unless removed
  15. 2004LB7

    Injector blowby LB7

    Did you reuse the hold down bolts? Are any of the hold downs bent?
  16. 2004LB7

    Oil prime

    What about the easy stuff like the filter anti drain back?
  17. 2004LB7

    Engine temp started to climb during last trip

    Sounds like it's time to pull the coolant stack out and give it a good wash. Hard to wash out the debris when it's in the truck. Getting water to go through the radiator when you have the AC condenser in the way May also want to check / replace the fan clutch
  18. 2004LB7

    LB7 LML Allison 1000 conversion & swap

    Did you just do a valve body swap or whole transmission? Your first post sounds like you used the 2011 transmission. Photos look like a valve body swap
  19. 2004LB7

    August '24 Chat -- Its too damn hot!!

    Almost forgot to answer your question. The bushing is the ring or threaded protector that goes on threaded connector after the lock ring to protect the wire from abrasion. Often plastic but can be found in metal with a plastic liner and ground connector. But the simple plastic ones will suffice...
  20. 2004LB7

    LB7 LML Allison 1000 conversion & swap

    How did you get a calibration that adds a 6th gear, G solenoid and whatever other changes made that will load onto an 02 TCM?
Top Bottom