Stock rods!

[siclilly]

Hello everybody!I have a 04.5 lly efi live tuned by me 4inch staight pipe banks inter-cooler and intake with scoop ppe egr block off and shim kit with ppe liftpump suncoast 3 with ats 5star and copilot gt4088r.I just wanted to tell you a little bit about me. So I'm wondering how far I can take my stock rods? I have the truck tuned for 2100 rpm and up anything less and its stock.I'm a little scared to tune anything less than 60mm3.Does anybody have any thoughts.Thanks

 

[Kat]

Welcome

I haven't heard of people having problems with stock rods and GT40's.

But, then there are no guarantee's with hot rodding

 

[2wd_Sled_Puller]

You should be fine with that set up. But remember no matter what anyone tells u. You have a pay to play

 

[MAXLLY]

I ran a similiar set up, no 4088, for 30K miles IIRC.

No issue whatsoever when i tore down the motor. Bearings and rods appeared fresh as a daisy.

Dieselson may be able to share some insight. You could PM him if u like

 

[siclilly]

Right on thanks for the replys!!!

 

[WolfLMM]

My rods are fine. My turbo is very close to the same size as yours. I wouldnt worry......too much