Search results

  1. TrentNell

    S366 Turbo Question

    We rate our Billet S366 @ 750hp which is pretty close to the same turbo , I know it will do a little over 800 but running it that hard it wont last long and at that point your right at the peak if not past its MAP , and will take ALOT of fuel to achieve those numbers . IMOP if your after over...
  2. TrentNell

    Removing air filter(s) for racing / pulling

    If you filter setup and plumbing are large enough there wont be any real gains , I have seen a few trucks with too small of filter or intake pick up 40 HP by pulling the filter , on the drag strip I have ran no filter for 2 years now , I have had to replace one wheel this year , it never failed...
  3. TrentNell

    Allison 6sp: Trans Build, what clutch kit?

    x3 on going to see Mike for the best route , if you do decide on kit only the GMAX kits are a good setup and would be plenty to handle what you want now and have some room to grow .
  4. TrentNell

    2012 Diesel Power Challange

    I agree on the $$ part , I was going to enter my DD since its about to get built up and the setup would be perfect for this type of challenge but I wasnt willing to risk blowing it up for bragging rights so didnt enter this year .
  5. TrentNell

    suspension setup for high 11's

    Decent shocks ( Rancho's or QA1's ) , caltracs or clamped springs and decent track prep should be fine , only way you will need more is if you decide to really stretch what ET you can get out of what ever you MPH is .
  6. TrentNell

    LML Turbo swap?

    I doubt there will be tuning good enough to do away with the stock turbo for a while , we are going to be trying a twin kit on one soon and will be trying to use the H&S and a few other tricks to see if we can get a kit put together. Were ready now just have to lock down a truck to play with for...
  7. TrentNell

    How many build for 750 HP ?

    I did go with main studs on this build and do on most unless requested other wise , I have ran more HP than most with no main studs with no issue so i wont say there a nec item , but in the grand scheme of things its not that expensive to add them , they change the cost of a build by maybe 400...
  8. TrentNell

    How many build for 750 HP ?

    The other nice thing about over building a bit is if you ever decide to change your mind, your a tune flash and a few pieces away from going for 1k , on my dads truck a dual C kit and a reflash and he would easily be above 900 , the last truck we did the same turbo kit with 60% sticks did 940 at...
  9. TrentNell

    How many build for 750 HP ?

    Budget mostly , I donated the stroker pump of my Race truck to help the old mans pocket book out and ill pick up another one before spring , other wise we probably would have went with dual Cp3's .
  10. TrentNell

    How many build for 750 HP ?

    The engine portion of his build assuming your swapping the engine yourself and can assemble everything yourself but the short block I believe we were into it around 9k with the rebuilt cylinder heads , cam ,valve springs, head studs, gaskets ect . As far as what is the ideal build thats tough...
  11. TrentNell

    How many build for 750 HP ?

    Ill see what i can find , I have some pics of it some where of when we drove it down to Texas to tow home my white truck , and some others from when we put the twins on it last year ill hit my Dad up and see if has some too .
  12. TrentNell

    How many build for 750 HP ?

    I know most trucks built guys are usually shooting for much higher HP goals than 700-750 HP , our latest build was to build a truck for my Dad due to his truck loosing a piston , the reason we chose this HP level is that is were I felt we could have the truck be as reliable as possible while...
  13. TrentNell

    Off Season Drag Racing Mods

    I dont know if i will make any changes or come back out next year and find out what we put together this year will do , I do have some new ideas to play with but hate changing anything till we finish what we were working on this year , probably wont decide till January some time .
  14. TrentNell

    doing away with E brake and cables

    I deleted all the e-brake stuff on the race truck when i did the 4-link , i just removed the cable and all the frame brackets associated with it , but left the pads in place and its been fine for 2 years .
  15. TrentNell

    LLY: BD supermax good idea?

    Give us a call , we have plenty of options and can go over all the differences between the turbo kits out there and how all the difference come into play and what the advantages each of them have , we can also help out with the trans parts if you in the market for those too . Trent 801-599-3922
  16. TrentNell

    Clattering noise? Any ideas?

    Ever do this test ? have to rule out tuning before a bad tip can be blamed . if you cant tune it out or it takes drastic changes that are not normal then you could logically move to it being the tips IMOP .
  17. TrentNell

    Sneak Peek!

    Lookin good Russ !
  18. TrentNell

    Why are people selling there trucks shortly after putting tripples on them.

    I cant speak for the reason the trucks were/ are sold or being sold , other than I have been there myself , by the time you finish one of these trucks your wallet is usually pretty bruised and and usually a few credit card too . As far as reliability concerns I have ran 3 different sets on my...
  19. TrentNell

    Bought a triple turbo duramax!

    Well post up when we find out I am curious myself , oil supply problem on truck or that turbo , containment in line or turbo during install , defective turbo ( it happens ) , boost leaks can over spin chargers , plenty of other things . I talked to Kervin tonight and he is shipping us the kit...
  20. TrentNell

    Bought a triple turbo duramax!

    :eek: sounds like she has been rode hard and put away wet :( give me a shout on the turbo , would like to go over a few things and see why the bearings would be loose already , I dont think they have many miles on them , if its happen stance it should be covered under BW warranty , if its...