Search results

Search the forum Search Articles
  1. juddski88

    LMM code P0299

    You likely have a boost leak
  2. juddski88

    Installing a 6 Speed Allison behind a 12v Cummins

    They are Alto G3B (c2) and G3C (c3/c4)
  3. juddski88

    LML coolant issue

    You may now have a slight leak in the plumbing which is releasing the pressure, or the headgasket sealing area is now contracting enough when cold to release the pressure. Either way, a compression leak at the head gasket is a dynamic issue.
  4. juddski88

    Dorman body mounts dont fit...

    Gosh, I've returned countless items to rockauto, even modules, and not a single issue. Sorry to hear of your troubles.
  5. juddski88

    1/8 mile discussion and time slips post here!

    That's some steam! Nice work!
  6. juddski88

    2013 LML - P0420 and P205B

    Sounds like you could use some more beer
  7. juddski88

    #2 cylinder fuel injector blow-by

    Some things that happen are that the injector hold down wears or bends slightly, the factory hold down bolts can stretch pretty easily, the threads in the head can wear, and the sealing surface of the head can wear.
  8. juddski88

    LBZ turbo, replacement turbo question.

    It will work for you, yes.
  9. juddski88

    LLY Ficm

    I think you meant to say [presumably] "lly ficms won't talk to lb7 ecms." Are you sure about that? Also, the higher voltage to the lly injector solenoids haven't caused a real reliability issue because it is being pulsed. The real issue with running lly/lbz/lmm injectors on the lb7 ficm...
  10. juddski88

    No crank

    If you want to be 100% sure it is the fuse panel and not wiring, unplug the fuse panel connectors and test for continuity at that relay socket. But I'm betting fuse panel.
  11. juddski88

    No crank

    Could also be a bad fuse panel...seen it many many times
  12. juddski88

    Problems attempting injector cleaning

    The DEF injector, among many abnormal operating conditions, can mess up a sensor or cause readings to be out of range, but it won't kill the module communication
  13. juddski88

    Problems attempting injector cleaning

    The NOx module comm issue is, unfortunately, fairly common on the l5p. They were on backorder for several months, and may still be.
  14. juddski88

    Transmission problems -- P0722

    Use the search bar on this site and you'll find the diagnostic tree for that code.
  15. juddski88

    Transmission problems -- P0722

    Is your truck an early 2015 or late?
  16. juddski88

    Nitro Worm Gear Differentials

    Thank you for that feedback. Just did the rear, not the front, correct?
  17. juddski88

    Nitro Worm Gear Differentials

    Yeah man. I turn away more work than I take in, been that way for several years. I am interested in hearing what people's experience is with these units though, regardless. SEMA and PRI and the magazines are great about introducing new product info, but one thing I value most about this forum...
  18. juddski88

    Nitro Worm Gear Differentials

    Not my choice. I dont peddle parts. My goal is to sell and install what has been proven to work through first-hand experience. If people that I consider to be expremely reliable and experienced sources tell me they have used something effectively and reliably, I'll consider using it. Until then...
  19. juddski88

    Nitro Worm Gear Differentials

    Yeah. I've used the Eatons a bunch and a few Yukon Grizzlys, I need feedback on Nitro's version specifically. Kind of like their G2 gearsets have driveability flaws and I'd never run them in a high HP build...
  20. juddski88

    Nitro Worm Gear Differentials

    Good Morning guys, I have a customer who was interested in these differentials and I have not personally used them, nor has anyone else in my orbit. Online searches on the diesel forums didnt turn up much. Let me know if you've had experience with them, good or bad, in both daily driving...
Top Bottom