Search results
-
LML Allison acting up
They had some problems with the TCM on the 11's. I had a bad TCM destroy my tranny at 64,000. GM covered the tranny, I had to pay for the TCM. Apparently something with a bad internal ground within the TCM causes the problem. I started getting some codes and it wouldn't down shift when you came...- duramaxzak
- Post #5
- Forum: Mike L's Trans Talk
-
Duramaxzak 2.6 pulling truck build
I noticed after my last hook that #5 cylinder injector balance rate was +15, so thought either the injector went south or there was something wrong with that cylinder. Well, did a compression test yesterday and cylinder #5 only has 100psi of compression. I will be pulling the head today to...- duramaxzak
- Post #328
- Forum: Sled Pulling
-
4th Gear Pulling
Build lots of heat in your tranny and converter.- duramaxzak
- Post #17
- Forum: Sled Pulling
-
4th Gear Pulling
Here's a link to the calculator I used. http://www.public.asu.edu/~grover/willys/speed.html- duramaxzak
- Post #14
- Forum: Sled Pulling
-
-
-
-
-
-
4th Gear Pulling
I don't think you have enough ponies to run 4th! Maybe if its a real loose track.- duramaxzak
- Post #5
- Forum: Sled Pulling
-
-
New Turbo and still NO boost. HELP!!!
http://youtu.be/atretf9u-Mc- duramaxzak
- Post #41
- Forum: Turbo Talk
-
New Turbo and still NO boost. HELP!!!
You need to apply pressure to the inside of the boost tubes. Spraying the out side is not going to do anything unless there is a serious hole.- duramaxzak
- Post #37
- Forum: Turbo Talk
-
-
Duramaxzak 2.6 pulling truck build
I expected there was going to be some bugs to work out of the truck after so many things had changed and also having to relearn to drive it. I probably will not be hooking again for a couple weeks.- duramaxzak
- Post #325
- Forum: Sled Pulling
-
Happy Birthday Hondarider 552
Elvis with camel toes!:confused:- duramaxzak
- Post #35
- Forum: Smoke Signals
-
New Turbo and still NO boost. HELP!!!
These are nice set-ups. http://dirtyhookerdiesel.com/i-14902661-dhd-205-105-lbz-duramax-3-super-high-flow-intake.html http://hspdiesel.net/LBZ-LMM-Max-Flow-Bridge-Cold-side-Over-Alternator-Combo-LBZ-222-00.htm...- duramaxzak
- Post #16
- Forum: Turbo Talk
-
New Turbo and still NO boost. HELP!!!
The LBZ Y-bridge is two pieces, they can blow apart and leak. There is a big o-ring holding them together. Also have the factory intercooler and pipes pressure tested. Was the turbo vein position sensor replace when the turbo was replaced or was the old one used?- duramaxzak
- Post #14
- Forum: Turbo Talk
-
Duramaxzak 2.6 pulling truck build
Start in 3rd and stay in 3rd, I have 3:42 gears.- duramaxzak
- Post #320
- Forum: Sled Pulling
-
Duramaxzak 2.6 pulling truck build
I had a ruff day pulling last Saturday, first I got to the gas station on the way to the pull to get fuel and ice and I forgot my wallet. Luckily my brother inlaw had some money to cover me. Than it was about time to start lining the trucks up for my class and I could not find my keys for my...- duramaxzak
- Post #318
- Forum: Sled Pulling