Search results

Search the forum Search Articles
  1. adeso

    Cummins built motor question

    Also, don't want to hold any RPM for a long time (like taking it on a trip with the cruise on) I think I locked mine into second and would take it from idle to 3500 RPM a bunch of times after the first heat cycle
  2. adeso

    Top 53 RWYB Street Legal List

    Think it is fine, with no class to set what people are running it lets more of the stoy out. Like how my retarded ass is somehow still #21 with giant tires and at almost 8K. I should put that setup into a gutted out RCLB!
  3. adeso

    Cummins built motor question

    Take it easy for the first couple hundred miles, change the oil then if it is done right it won't matter. I like to go easy for that first little bit to let everything set in and if something is bad wrong good chance you can ID it before you put the power to it, but if it is done right 2-300...
  4. adeso

    LB7 Blown head gasket and/or injector cups Part 2 after closed thread!~

    There you go bud
    • adeso
    • Post #87
    • Forum: LB7
  5. adeso

    Re-Gear question

    balance is everything! you gain nothing from over driving a comp out of the MAP, and while it helps the lower end spool you need to watch how much fuel you put to a turbine. You get a lot of pulse in the manifold so you need either a sensor that can damp it out or something like a crimp to damp...
  6. adeso

    Re-Gear question

    You can get a gage and tap it off the other manifold the same place you did for EGT probe, but you need a bunch of tubing to let it cool down before it gets to the gage. The ideal DP is 1 to 1 ratio with the boost but with the VVT you won't see that, a lot of DP tells you that something (99% of...
  7. adeso

    cp3 tapping?

    My CP3 makes a tap sound. get one of these to track it down http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_x_10042652-P_x_x?cm_mmc=ACQ-_-Google-_-enhancedRM-_-10042652&ci_src=17588969&ci_sku=10042652&ci_gpa=pla&ci_kw={keyword}&gclid=CLjUpMWgqrUCFcWPPAodyCsAuw#fragment-1
  8. adeso

    Happy B-day malibu795 & paint94979

    you have to share a birthday with Paint? I'm sorry dude :D
  9. adeso

    New pistons

    Right now I think I can do it for about the cost of the pistons, a gasket kit rings and maybe bearings. If I crack one it could cost me a lot more since I can't machine a block here so I would rather just do it now
  10. adeso

    New pistons

    I only have stock cut and coated LB7s, and want more power. I know I'm up near the it might hold it might not area and would rather fix it before I break it
  11. adeso

    Duramax surging at hwy speeds.. NEED HELP!!

    Just be very careful messing around with it while running, don't ever put your hands down there to feel for it. high pressure fluid can really mess you up
  12. adeso

    New pistons

    Should be just a clean up hone, right?
  13. adeso

    New pistons

    I'm looking at putting Finger's pistons into my built engine that has about 20K on it (still runs fine), what do you think new bearings and rebalance and call it good? his pistons should be close to what my stock cut are. I'm thinking maybe new crank but if this one mag test good (again) and has...
  14. adeso

    Watch OUT!!!

    So between dealing with that chit and the fact that DF made it clear nothing comes between their money tree (vendors); and if you are in with them you can have free run of the place I chose to not go over there
  15. adeso

    Watch OUT!!!

    No I left b/c you and your little trolls got way out of hand, to a point that you tried to affect me at work and the DF wasn't worth my time anymore. You could get away with it b/c at the time you were back door selling parts with a vendor on there and buddies with him.
  16. adeso

    Watch OUT!!!

    There are a lot of good people over on DF, with that being said it seems like it is overrun with what the vendors can do and why I left. You say I can't post stuff about non vendors etc b/c I am cutting in on their business, but why don't I get paid then to do write-ups that bring people onto...
  17. adeso

    Duramax surging at hwy speeds.. NEED HELP!!

    Don't drive it dumping fuel in like that, it might be electrical if it is commanding something strange like that. I would check all the grounds, I have had a bad ground do strange things to me
  18. adeso

    cold weather fuel

    A few updates It did reclog my filters, so I would say to anyone out there carry 2 spare sets for everything. Just for grins I wanted to see what would happen if you tried to save a filter, so on the fleet guard filter on the AD I drained it, filled it up with 911 and heated it up some, dumped...
  19. adeso

    Duramax surging at hwy speeds.. NEED HELP!!

    Recheck your ballance rates. do a return (bottle) test. How cold is it where you are at? did you check the rail PSI while it was surging? Was it putting fuel in the oil before or did it just start after you went into it?
  20. adeso

    Top 53 RWYB Street Legal List

    My time was with 37X14.5 nitto terras
Top Bottom