Search results

Search the forum Search Articles
  1. durallymax

    Transmission leak

    Nothing you have to do. If you know your way around it you could tear it apart to look at the clutch packs, but if you just want to replace the extension housing you just need an extension housing gasket and transfer case gasket. The only special tool you will need is a 4 prong socket for...
  2. durallymax

    Show off your new tools!!!

    Just got the USB charger today. Use an M12 battery in it and charge phone, etc. Also has a DC power jack. I can always find USB cables but can never find the 12v or wall ends of them, plus a wall charger isn't always an option. Should come in handy once and awhile. Especially on trips where a...
  3. durallymax

    Friend straight piped 2015 Dmax.. NO codes thrown?? No tuner...

    Its not hard on it but sounds like a winner. I'd trust his story, in fact I wouldn't use protection. No Ragrets.
  4. durallymax

    Will not move after rebuild

    Doesn't matter how many you do, you will have issues. The more you think you shouldn't the more you will have because you wont be watching for them. Prefilling converter is a waste of time, no need. If you have no line pressure something could be causing this internally, whether its a...
  5. durallymax

    2wd?

    Looks like a couple rough passes on the boobtube too. Ripped the hitch off in one? Driveshaft in this one? looks/sounds pretty neat though. TWR-2B__grY
  6. durallymax

    pretty much lost

    Check the balance rates first. Then command 160Mpa and see if the pump can hold it. 5,200psi (35Mpa) at idle is good. If it was pegged and the truck was loping then somehow your FPR got unhooked. No reason to unhook it for injectors but who knows. Doesn't sound like that is the case. Run a...
  7. durallymax

    2wd?

    people do it. ri_T5cKKIqg
  8. durallymax

    pretty much lost

    What color smoke? Who replaced injectors? How are balance rates now?
  9. durallymax

    lights

    I don't like the looks of it on pickups, and only like a certain amount done the right way on our semis, but look into Grote "Micronova" and Truck Lite's peel-n-stick lights. They would work well for what you want to do. I use the peel and stick ones a lot, very bright.
  10. durallymax

    P0776 SunCoast Valve Body

    Not saying you did anything wrong, sounds like you did a decent job. Stuff happens, you can play with valvebody if you want, talk to suncoast or pull the trans back apart and see whats up. Sometimes just redoing it fixes it. I've had to do it enough times, some two times to get them to work...
  11. durallymax

    Show off your new tools!!!

    Too much milwaukee. Had to get a new M12 fuel impact because I lost my other one. Also got an M12 non impact driver. Love that thing for running in stuff you don't want an impact on. Just put together an entire LMM from block to complete with it and the battery still shows two bars.
  12. durallymax

    P0776 SunCoast Valve Body

    Not a lot to "flush" when you build it, if you disassemble everything you can see nearly all of the surfaces and passages. Getting everything sparkling and keeping it that was as you assemble is key. Some guys will assemble in an old barn with the doors open and a crosswind outside and have good...
  13. durallymax

    Allison 5sp: Range Shift Inhibited....

    To clarify what mike said, yes the parts out of Transgo JR are same for 01-10 trucks. JR just includes the trim valve mods for less than 100.
  14. durallymax

    Who is running AF (alternate firing) order cams, and for how long?

    Actually most do cruise near peak torque RPM, engine may not need to make it all of the time but remember not everyone is just hauling air around either. Throw in a hill and its not hard to use 1000lb-ft
  15. durallymax

    Allison 5sp: Range Shift Inhibited....

    Yes that is correct layout for trim valve A
  16. durallymax

    LBZ: LBZ white smoke rough idle

    Contamination can still happen although not as likely with that many filtration steps. Time on the truck doesn't matter, for this truck it was less than 100 miles and it was junk. The issue was a used fuel barrel he decided to use to store his diesel. You can go into DVT to command fuel...
  17. durallymax

    LBZ: LBZ white smoke rough idle

    Have you tested to see if it can hold max rail pressure at idle? Had an LBZ do the exact same thing you are describing, fuel smoke then dead. Balance rates were misleading because of how poor all of the injectors were due to contaminated fuel. The return rates were also very misleading, the...
  18. durallymax

    Odd chattering noise from torque converter area.

    While yours was faulty, the ATS converters are very noisy converters. I compare it to replacing a DMF with a light SMF. Lots of rattle when sitting still. Did you have your inspection cover installed? The noise will be much more pronounced with it missing. In addition to the normal rattle, the...
  19. durallymax

    Crossfit

    I said nothing about Paleo being a fad, I said many of the things you listed are fads. Not to every person, but there are many people simply following the herd with no knowledge which means it is a successful fad. If you have a true gluten disorder thats great (well not really), I...
  20. durallymax

    Crossfit

    I kept my cool before but this one hits a nerve. If you get your head out of heart magazines and read real information from those on the front lines with cancer versus the sideline you will find that the major cancer institutes all debunk this common myth. Every cell in your body uses...
Top Bottom