Search results

Search the forum Search Articles
  1. DaJokr

    NEW... Beefy lower control arm bracket

    Thanks. :thumb:
  2. DaJokr

    LBZ: Turbo swap

    2 are easy to get at. Third is a bitch. Most miss the third one the first time it seems. Paint...lmao
  3. DaJokr

    Brodix cylinder heads for the Duramax

    For those silly enough to use there trucks as dd's...like me :) Could probably offer a set without the gp port and have a solid head though.
  4. DaJokr

    NEW... Beefy lower control arm bracket

    I run the dhd center link brace. I would like to install this as well. Plus...i will be rebuilding the front come spring: kryptonit e tierods and center link, new idler and pitman. Will all these parts work together? Or are there combinations that will not? Truck is stock height with plans on...
  5. DaJokr

    LBZ: Trans build prep

    Just an update, trans has 8000km on it now. Converter has really smoothed out. Puts power down really smoothly with the tuned TCM. Was nervous at first about taking it on the road because of my, erm, basackwards Torrington placement problem. But now it's just like it was before it seems...minus...
  6. DaJokr

    CRU65's LBZ build thread

    You will have to let me know how the electric cutout for your exhaust is. Be interesting to see how much better it breathes for the track. I imagine there will be some nasty drone down the highway though.
  7. DaJokr

    Exhaust Manifold Porting/Polishing

    Sub'd to find this later. My quest to lower egts has begun and might fit the bill perfectly :)
  8. DaJokr

    GMC bumper on Chevy?

    Body lines wouldn't line up, would look hella goofy IMO.
  9. DaJokr

    All Season Centerlink Brace

    Correct me if I'm wrong as I'm currently running the centre link brace...it will work with the kryptonite centerlink and tie rods? I think I read Dustin ran them together with no problems.
  10. DaJokr

    Question: Has anyone put light bars on the front of a 03-07?

    I'm sure someone has, if a GMC can fit it with smaller grill holes, you should be able to as well. Measure the width of the grille and I'll measure mine and let you know. Rigids 30" fit fine on my gmc though. Looks like the grille opening is the same on the chev to me...
  11. DaJokr

    LBZ: Trans build prep

    That's a lot worse then mine. The needles were still in the cage. Just a couple chunks from the planetarys missing and dents in the sungears. $600 in parts, 1000 in labour though:( 1100mi and converter is starting to smooth out. Jerks still, but not bad enough to bark the tires. We shall see...
View older results
Top Bottom