Search results

Search the forum Search Articles
  1. H

    Help: U1000 and C0245 after turbo install, HELP!

    Did you remove the EGR when you installed the turbo? Or has it been undone?
  2. H

    Help: U1000 and C0245 after turbo install, HELP!

    Test between A1 & B1 for 1000k Ohm resistance (Left front WSS circuit) Test between A2 & B2 for 1000k Ohm resistance (Right front WSS circuit) Each circuit should be between 950 & 1100 Ohms. If both are within range, I suspect that, from reading others with the same C0245, that the egr...
  3. H

    Constant brake caliper/cradle rattle?

    Remove the slide bolts and lube them with the proper grease after flushing the crap grease or anti-sieze out. In extreme binding cases, the inner sleeves will need replaced. (they look like short pieces of vacuum hose.)...
  4. H

    LB7: wheel speed sensor's

    If the speedo is working, transmission shifts normal, and the ABS lamp is off, the rear speed sensor is fine. If the ABS lamp is off and the brakes have a skipping feeling when slowing from 8 to 3mph, then corrosion has lifted one or both front wheel speed sensors out of place (or a front...
  5. H

    Windshield wipers and washer coming on automatically

    Turn off the heated wiper fluid. In the left center portion of the dash, there is a square button with a windshield Icon on it and a little amber LED. And, if you haven't seen a dealer for the updated harness adapter/ fuse holder for the heated washer fluid, may I suggest you do so. It is a...
  6. H

    Info: Door Hinge

    How I did mine........... 1. Roll the window down. 2. Remove door sill plate (pull straight up, starting at the front) 3. Remove kick panel (1st, pull firewall edge of the kickpanel towards the center of the truck to release that edge, then pull the pillar side of cover toward the rear of...
  7. H

    Moving on over, sorta

    Have you changed the blinker fluid? Did you use the "hoot" method?;) PS....I'm not sure you need to yell.:cool2:
  8. H

    09' bcm in an 06' and remote starting?

    Nope, not a one.
  9. H

    Moving on over, sorta

    I was hoping I still had a toe after the inverter thread, as I linked the pics from elsewhere. Do younz have Image Hosting? I couldn't find it when I answered the thread.:hug:
  10. H

    fan blows, but no air

    My hunch says the evaporator is icing over. A faulty low side pressure switch or simply low on freon will both cause the same thing, no airflow. On a humid, hot day, there should be a puddle of water beneath the drain tube (just right of the tranny bellhousing), and when your airflow goes...
  11. H

    Power inverter on switch

    Pull out the original switch and, after cutting off the switch, connect the two wires to the 30 and 87 poles of a automotive relay. Then connect 85 to your new switch (which is 12v fed), and connect 86 to ground. I put the latest one in the B-pillar. And the inverter behind the seat...
  12. H

    Moving on over, sorta

    Just a brief intro. I'm on DP all the time, and I've decided to broaden my horizons, so to speak. I hope to learn and share here too. I manage a construction company fleet and have been blessed (cursed???) with more than my share of Dmax trucks. I do most of the maintenance and repairs and...
View older results
Top Bottom