Seriously?

ikeG

ikeG

Oughta Know Better
Apr 19, 2011
2,472
152
63
Western PA
www.facebook.com
'Rust belt' vehicles need brakes and rotors long before the brake friction material EVER wears out. In its defense, this VW TDI sat for an extended period of time before, during and after the emission recall. And it is from NY, which is worse in our experience. But this is bad.
39e3a89e60ce3364378b9a8ec28d7083.jpg
41d4201ebfae6dcfa0656cd343bcd86e.jpg


Sent from my SM-G960U using Tapatalk
 
TheBac

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
15,684
1,952
113
Mid Michigan
Typical on that rotor. Almost always on the inboard side. Pad slides get gummed up and pads stop sliding easily. Typical brake maintenence every spring is to pull pads, clean the crap out and relube. Most people dont, and that's what you're left with after a while.
 
THEFERMANATOR

THEFERMANATOR

LEGALLY INSANE
Feb 16, 2009
3,890
44
48
44
ZEPHYRHILLS, FL
ikeG said:
Next line of defense would of been the maf sensor! I'm sure some small parts made it
bbfb5613fc9fcb578659183b32c5dab7.jpg
5075961625f42dc4e59e21ccdf958312.jpg


Sent from my SM-G960U using Tapatalk
Click to expand...
Reminds me of a Cummins I worked on when I worked at a Dosge dealer. It was a farm truck, his air filter got completely plugged, then wet, the filter came apart, and the turbo ingested it and the metal mesh from the air filter. Needless to say he was complaining of low power and engine noise when he did give it some throttle. That was an expensive bill for a new turbo and intercooler.
 
ikeG

ikeG

Oughta Know Better
Apr 19, 2011
2,472
152
63
Western PA
www.facebook.com
Pretty common for brakes & rotors to look like that. Part of my point was someone just recently installed new brakes with the rotors looking like that. I see it quite often.

Sent from my SM-G960U using Tapatalk
 
ikeG

ikeG

Oughta Know Better
Apr 19, 2011
2,472
152
63
Western PA
www.facebook.com
Buddy of mine had an injector go bad and the FCA was stuck too. Got all that buttoned up and thought, I better check the filter. Sure enough...

Sad part is I put all new Bosch injectors in 18 months ago.
1df775f79b3e358e61af8d7c77973d7e.jpg
60f0bf4ca29bc74c2922bb14bed93fb5.jpg


Sent from my SM-G960U using Tapatalk
 
B

Blackmax123

Member
Aug 2, 2014
683
1
18
central Pennsylvania
Reason I ask is it could be any thing from b2 to b20 from the pump depending on where he got fuel and what they bought from the rack. And to my understanding water will not separate to the bottom of high blend bio fuels.
 
You must log in or register to reply here.
Top Bottom