Piston Bowls

[WI Huck]

! Should get really interesting...

mg: A lot of good those ponies will do you. It is cool to see how far you can go with it though! :thumb:

 

[MarkBroviak]

Update! Triples and 200%injectors in and I'm now at 1151hp 2,xxxftlbs at 82psi boost 100psi drive and she is a beast!!! Love these pistons!!! Made 10 passes on the dyno tonight all between 1140-1151hp in 5th gear loaded up as hard as I could! Tires were being bitchy but what can you expect, lol. Thanks Jon!!!

 

[coker6303]

Nice!!!

 

[1slowmax]

Update! Triples and 200%injectors in and I'm now at 1151hp 2,xxxftlbs at 82psi boost 100psi drive and she is a beast!!! Love these pistons!!! Made 10 passes on the dyno tonight all between 1140-1151hp in 5th gear loaded up as hard as I could! Tires were being bitchy but what can you expect, lol. Thanks Jon!!!

Your going to MPH like a MOTHER F*&$%R now. Good luck!

 

[Hot COCOAL]

Update! Triples and 200%injectors in and I'm now at 1151hp 2,xxxftlbs at 82psi boost 100psi drive and she is a beast!!! Love these pistons!!! Made 10 passes on the dyno tonight all between 1140-1151hp in 5th gear loaded up as hard as I could! Tires were being bitchy but what can you expect, lol. Thanks Jon!!!

On just fuel, wow, that's awesome!!!

 

[bcdeutsch731]

On just fuel, wow, that's awesome!!!

Not just on fuel, but on a single cp3 pump!!!

 

[paint94979]

That's awesome congrats mark

 

[Fandango]

Schwing!

 

[Dirtymaxx03]

Not just on fuel, but on a single cp3 pump!!!

:spit:

is it an exergy 10mm?

 

[wrcknkrw]

Congrats Mark. That's some awesome numbers.:thumb:

 

[DaveB]

:spit:

is it an exergy 10mm?

12mm Exergy

 

[JoshH]

:spit:

is it an exergy 10mm?

I think he upgraded to the 12 mm.

 

[Cknight199]

Wow these pistons are unbelievable to live this long at 1000+ hp daily driven!

 

[mackthehack]

Congrats Mark

 

[Burn Down]

Wow! Nice job Mark. Very impressive.

 

[Fingers]

:thumb:

 

[adeso]

Think it might be time to order a set for this winter! and bigger injectors, these puny 60 overs are not cutting it

 

[WI Huck]

:thumb:

:thumb: Indeed!

 

[daniel12]

I finally read the whole thread. These pistons are going in my 2011 LML right now.

 

[Evan@InglewoodTrans]

Well I cracked one.