Is the Setrab adapter different from the adapter you get from the dealer?
Sent from my LM-G900 using Tapatalk
Oil cooling
- Thread starter super diesel
- Start date
Sent from my LM-G900 using Tapatalk
The adapter is for an external oil cooler. I’m not sure what adapter the dealer would provide.
Sorry, I should of looked at the picture closer, but I appreciate the feedback.
Sent from my LM-G900 using Tapatalk
Setrab 19-SPT76-22-180-22 SUSA HyperFlow Sandwich Oil Filter Adapter M22x1.5 Nipple Thread, ProLine M22x1.5 Port Thread
Setrab 19-SPT76-22-180-22 SUSA HyperFlow Sandwich Oil Filter Adapter M22x1.5 Nipple Thread, ProLine M22x1.5 Port Thread https://www.amazon.com/dp/B07FXWGP8...abc_E0R8W7B5ZPMDFGB860A4?_encoding=UTF8&psc=1
Thank you! I think a thermostatic sandwich plate will be better for me on my daily. I'll use my non-thermostatic unit for my race truck.
I am working on putting together an LB7 kit for my truck but was wondering if this where guys are getting the Mocal sandwich oil cooler adapter these days?
www.improvedracing.com
I tried the old race parts link, but it didn't work anymore.
When ordering the adapter, it lists a 13/16-16 thread as an option. Does this also mean that the new thread sticking out of the base will still be 13/16-16 thread so we can continue to use the same PF2232 oil filter?
Oil Filter Sandwich Plate with Thermostat for Oil Coolers, -10AN
Available in all popular oil filter thread sizes for easily plumbing an oil cooler to your engine Built-in thermostat allows for quicker warm-up times and prevents the oil cooler from over-cooling the engine during street driving Ports are -10AN male flare (JIC 37-degree standard) Lifetime...
www.improvedracing.com
I tried the old race parts link, but it didn't work anymore.
When ordering the adapter, it lists a 13/16-16 thread as an option. Does this also mean that the new thread sticking out of the base will still be 13/16-16 thread so we can continue to use the same PF2232 oil filter?
Here where I got mine. https://www.batinc.net/#PRODUCTS
Scroll down to oil cooler take-off and sandwich plates. Model SP2TC
You can't order online but all you have to do is call them and they will fix you right up.
Yes the 13/16" is the correct thread for the 01-19 duramax cooler and filter.
Scroll down to oil cooler take-off and sandwich plates. Model SP2TC
You can't order online but all you have to do is call them and they will fix you right up.
Yes the 13/16" is the correct thread for the 01-19 duramax cooler and filter.
I’ve got one for sale.. PM me.I am working on putting together an LB7 kit for my truck but was wondering if this where guys are getting the Mocal sandwich oil cooler adapter these days?
Oil Filter Sandwich Plate with Thermostat for Oil Coolers, -10AN
Available in all popular oil filter thread sizes for easily plumbing an oil cooler to your engine Built-in thermostat allows for quicker warm-up times and prevents the oil cooler from over-cooling the engine during street driving Ports are -10AN male flare (JIC 37-degree standard) Lifetime...
I tried the old race parts link, but it didn't work anymore.
When ordering the adapter, it lists a 13/16-16 thread as an option. Does this also mean that the new thread sticking out of the base will still be 13/16-16 thread so we can continue to use the same PF2232 oil filter?
Put a 2020 cooler on my truck today went fine other than my temp probe leaking. Had to take it off and put the plug back in. Any ideas on how to seal it? O-ring?
Just to clarify for those following this thread that don't already know. The coolant pipe on the LMM that taps off the oil cooler adapter to the rear engine cover is the supply to the egr and then to the heater core. Not the return. Yes it can and should be re-routed like other generations, especially for those who no longer have an EGR and live in cold climates who value their heat.
Put a 2020 cooler on my truck today went fine other than my temp probe leaking. Had to take it off and put the plug back in. Any ideas on how to seal it? O-ring?
I used a oring and a thread sealer on mine and it doesn't leak.
I don't think so, but it had a desently sized hex head that it sealed against. The adaptor i used was a glowshift m12-1.5 to 1/8 NTP adaptor.
Mike is right! I you want just enough to create a seal… don’t glob it on if you use it.