Oil cooling

TheBac

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
15,692
1,971
113
Mid Michigan
So, buy the L5P bolts along with the cooler? Knowing GM, those suckers will be pricey.

Get the specs on them, Ace Hardware has metric flange bolts for a lot less.
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,761
5,933
113
Phoenix Az
2004LB7 said:
Can you just cut the bolts down or is the threads to short?
Click to expand...


You might be able to but the shank would be rrreeeaaallll close to hitting the threads. You still need two bolts either way

TheBac said:
So, buy the L5P bolts along with the cooler? Knowing GM, those suckers will be pricey.

Get the specs on them, Ace Hardware has metric flange bolts for a lot less.
Click to expand...



That’s where I’m headed today
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,761
5,933
113
Phoenix Az
You will need 2 8mmx1.25 120mm long bolts and 3 8mmx1.25 40mm long bolts for the other three mounting bolts of yours are too long. My ace only had 110mm long bolts and they are too short so I ordered 2 in from Allen’s fasteners. Couldn’t find a flanged bolt in that length so you may have to buy GM bolts with the cooler if you want them all to match or change them all out so they match
 
LB7 Lover 1994

LB7 Lover 1994

Know Nothing
Jul 20, 2013
262
0
16
Greene County, In
Chevy1925 said:
The new cooler is 20mm where the old coolers are 13/16”.

the lml manifold fits quite well. Just need a touch of clearancing on this heat shield mount (bottom rear)

aa8b62448b56dc0dfe2999fa856db725.jpg


Also, i don’t know if lbz and up will be an issue but lly/lb7 guys, you will need all new bolts. The 3 short ones are too long by about an 1/8” and the two long are wayyyyy longer than your stock ones. I have double stacked washers on the 3 short bolts for now to just hold it in place. You will also need a third bolt for the elbow.

7e80a7d95c4df044f45e188dfc12f320.jpg


This thing is massive though. Pics don’t do it justice

e3e2b01282410496204353ccb76a7fa0.jpg

89d956bcafb851e6fe3fe3e534e396c1.jpg

25fc67b63bfef9e83a7d35c0c38a7417.jpg


Thanks again josh for getting this out quick to me :D
Click to expand...

Could someone help me with what port my temp sensor needs to be placed in. Which of the Allen plugs is it
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,761
5,933
113
Phoenix Az
i couldnt find one. its not really tapered nor is it o-ringed. its also metric thread

made my own from one of the factory plugs

2BCWohtl.jpg

Yhq7vsMl.jpg
 
LB7 Lover 1994

LB7 Lover 1994

Know Nothing
Jul 20, 2013
262
0
16
Greene County, In
That is an awesome ideal! Will definitely be doing that to mine. I have been scouring all my vendors and have not been able to locate a 20mm- 13/16 adapter any where!
Which of the three plugs is it that it needs to go in?
Chevy1925 said:
i couldnt find one. its not really tapered nor is it o-ringed. its also metric thread

made my own from one of the factory plugs

2BCWohtl.jpg

Yhq7vsMl.jpg
Click to expand...
 
Bdsankey

Bdsankey

Vendor
Vendor/Sponsor
Feb 1, 2018
4,225
1,330
113
Larsen, Wisconsin
LB7 Lover 1994 said:
That is an awesome ideal! Will definitely be doing that to mine. I have been scouring all my vendors and have not been able to locate a 20mm- 13/16 adapter any where!
Which of the three plugs is it that it needs to go in?
Click to expand...

Why are you trying to go to 13/16? Most temp probes are 1/8npt.
 
Y

yellowchevy

Well-known member
Sep 9, 2010
1,926
82
48
Louisburg, KS for now
Dumb question and it might have been answered but is the idea to upgrade to the 2020 oil cooler and then you don't need an external radiator style cooler?

JAMES!!!! this question is for you mainly...:D:roflmao:

Yellowchevy
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,761
5,933
113
Phoenix Az
TheBac said:
are you guys trying to find something like this?
https://www.amazon.com/Sensor-Adapter-Water-Boost-M20x1-5/dp/B01NAQW6X8
or this?
https://www.ebay.com/itm/Metric-Fit...-Female-Gauge-Sensor-Adapter-GU-/162518700736


With the lip on the plug, Id think the first one I linked might be a better choice?
Click to expand...

top one might work well. i had searched parts stores as at the time, i wasnt going to wait for an adapter to get the engine in and running... that changed :roflmao:. it will need a gasket of some sort for sure.

yellowchevy said:
Dumb question and it might have been answered but is the idea to upgrade to the 2020 oil cooler and then you don't need an external radiator style cooler?

JAMES!!!! this question is for you mainly...:D:roflmao:

Yellowchevy
Click to expand...

i dont know that yet. Honestly, the issue will become two fold. The bigger cooler will be great at bringing oil temps down at the cost of putting all that heat into the cooling system. If you really want to keep temps down (both coolant and oil), you are going to need more cooling capacity and this cooler but i dont know if it will get rid of the external all together.

when my truck is finally up and running reliably, i plan to do a trip or two before the new truck comes in and i wont be running my external oil cooler (sandwich adapter wont work on the new cooler). After what i saw pulling the hills from the dunes with leaky heads and oil temp staying way down from the aux radiator, i have hope but 80* is not the same as 105-110*. Hopefully its plenty because i dont feel like spending the cash on more parts for the truck when it wont see towing duty hardly at all.

the external is by no means a bad way to go, specially if you keep it out of the cooling stack. its not as efficient but you dont put added heat back into the cooling system and it brings oil temps down a significant amount.
 
gmduramax

gmduramax

Shits broke
Jun 12, 2008
4,082
252
83
Nor cal
yellowchevy said:
Dumb question and it might have been answered but is the idea to upgrade to the 2020 oil cooler and then you don't need an external radiator style cooler?

JAMES!!!! this question is for you mainly...:D:roflmao:

Yellowchevy
Click to expand...

Is this a serious question :roflmao: next will be a oil cooler running across the roof that looks like a light bar :hug:
 
2004LB7

2004LB7

Super Moderator
Staff member
Dec 15, 2010
7,139
2,231
113
Norcal
TheBac said:
are you guys trying to find something like this?
https://www.amazon.com/Sensor-Adapter-Water-Boost-M20x1-5/dp/B01NAQW6X8
or this?
https://www.ebay.com/itm/Metric-Fit...-Female-Gauge-Sensor-Adapter-GU-/162518700736


With the lip on the plug, Id think the first one I linked might be a better choice?
Click to expand...

I may be wrong, but from the photos James posted where he dilled and tapped the plug, it looks almost like there is a chamfered edge at the end. And maybe even one on the flange. I would bet this is the means of sealing. The ones you linked to seem to be cut at a 90* and would not seal properly against the internal chanfered surface

James, comments?
 
Chevy1925

Chevy1925

don't know sh!t about IFS
Staff member
Oct 21, 2009
21,761
5,933
113
Phoenix Az
2004LB7 said:
I may be wrong, but from the photos James posted where he dilled and tapped the plug, it looks almost like there is a chamfered edge at the end. And maybe even one on the flange. I would bet this is the means of sealing. The ones you linked to seem to be cut at a 90* and would not seal properly against the internal chanfered surface

James, comments?
Click to expand...



You are correct, hence I suggested a gasket of some sort (copper washer?) that’s hopefully wide enough to seal up. Just don’t know how well that will do under pressure in the long run
 
You must log in or register to reply here.
Top Bottom