hahah what is it?? may be able to slide it in with the rest of my stuff :thumb: these cases turned out real nice
Off Season Sled Pulling Mods
- Thread starter Rhall
- Start date
hahah what is it?? may be able to slide it in with the rest of my stuff :thumb: these cases turned out real nice
Can you just flip your belt tensioner because that and the oil fill tube is all I see different from my truck. So I think it will work. I'm assuming the belt is a different length though.
This is what I have, not sure it'll help. Keep in mind that my CP3 location uses more belt. I had the pulley off & had the stock fan pulley in place & had it looped around the A/C "dummy" bracket for testing because I am putting A/C back on. Also you know there are different size pulleys? I went with 2 larger to make it work. Hope this help a bit :hug:
Attachments
Dave
No I doubt you could flip the tensioner that is a 01 notice the difference on todds pic
Also notice the pulley above the balancer on both mine and todds are both missing
I got them making me one, They triple weld them for the diesels app. I went with the I.C.3k They recommend 10-15 gal ice tank.
They build an awesome piece, they also pressure check them for free after the seasons over. I know they deal with gassers a lot, I think we burn more ice than them, might want to go a tad overkill.
Next season I'm going to run a w/a in the pass seat of Abby
The best part about going water to air is that you always have somewhere to keep your beer cold
The best part about going water to air is that you always have somewhere to keep your beer cold
There are other reasons?
The best part about going water to air is that you always have somewhere to keep your beer cold
Is that all you can think about?
:rofl:
Make sure you check it b4 u start it up. I got one that leaked
Well have to double check it after adding supports to it this year.
Also used Boost Braces, buddies or whatever they are called from Vibrant for holding the tubes on. They seem like very nice pieces, we arent running 100psi or anything crazy, but they do help support them nicely for a low price.
That looks awesome! now this may be a stupid question but whats the advantage to remote oil filter? sides easier to change.
That looks awesome! now this may be a stupid question but whats the advantage to remote oil filter? sides easier to change.
I run a Holley Oberg style filter on mine mounted to the frame rail just under drivers door. Allows me to pull the screen and look inside after any run.
Thats so nice!!! No power steering? or is that a hydraulic pump?
I love where you mounted the alt
I love where you mounted the alt
So have you checked to make sure the screen is not siezed up? Doesnt sound like its been pulled out much?:roflmao::hug:
That looks awesome! now this may be a stupid question but whats the advantage to remote oil filter? sides easier to change.
I did it to save room.....if you run electric water pumps it handy.
:thumb: agree