Off Season Sled Pulling Mods

[Rhall]

Ive known a lot of top dmax pullers to solid mount the motor, but leave the stock tranny mount with no issues. But who knows, im willing to try it, tired of everything moving. With my M/A motor mounts my exhaust hits the side of the bolt on the hood flange that holds the stack on. I thought about mounting everything to the motor as well, but it would be tuff on some of my stuff.

 

[x MadMAX DIESEL]

Wanna sell those MA mounts Rob?

 

[JD Dave]

Is a 15 gallon tank large enough for an ice box for w2a?

 

[CurtisEmery]

It should be fine Dave, put your 8 or 10 bags of ice in and top it off with water.

 

[JD Dave]

It should be fine Dave, put your 8 or 10 bags of ice in and top it off with water.

I just didn't want to make it to small.

 

[Rhall]

Is a 15 gallon tank large enough for an ice box for w2a?

Mines 40, but its over kill, i do go through around 80lbs of ice.

 

[JD Dave]

Mines 40, but its over kill, i do go through around 80lbs of ice.

If you don't mind me asking, who's intercooler are you running?

 

[Rhall]

If you don't mind me asking, who's intercooler are you running?

Chiseled racing

 

[JD Dave]

Chiseled racing

Thanks. They look like they're very well made.

 

[TIMTHECARMAN2004]

Thanks. They look like they're very well made.

They are a very nice piece. They put extra supports on the welds for the diesel stuff because of boost pressure. Rob had his checked while the truck is down and it was still perfect.

 

[durallymax]

The tank on our 640 tractor holds around 35 gallons. Running the now second biggest Frozen Boost CAC (the $500 one, the one jim has), added ports in rear for dual in and dual out. Want to add some supports this year to it.

 

[bullfrogjohnson]

I need some belt routing help guys. I swapped to a van thermostats housing and don't know which way I need to go. Has anyone done this already with PPE dual fuelers and ac still intact?

 

[madmatt]

not as cool as Simon's trans or a reverser but if it breaks at least it will look good lol,,,

 

[JD Dave]

I need some belt routing help guys. I swapped to a van thermostats housing and don't know which way I need to go. Has anyone done this already with PPE dual fuelers and ac still intact?

I need to know this also.

 

[Tony Burkhard]

I need some belt routing help guys. I swapped to a van thermostats housing and don't know which way I need to go. Has anyone done this already with PPE dual fuelers and ac still intact?

Ive done it with a couple trucks but without AC.

 

[sweetdiesel]

I need some belt routing help guys. I swapped to a van thermostats housing and don't know which way I need to go. Has anyone done this already with PPE dual fuelers and ac still intact?

This might work. We added a pulley but got rid of ac pulley

It might work and you wouldn't have to add one

Mind you 01 are different


http://www.duramaxdiesels.com/forum/showthread.php?t=33933&highlight=Belt+set

 

[sweetdiesel]

not as cool as Simon's trans or a reverser but if it breaks at least it will look good lol,,,

Looks nice

 

[madmatt]

Looks nice

hope it holds nice too lol. Good thing my powder coater owes me. I'm abusing the shit out of him and don't feel the least bit bad about it

 

[01LB7]

Can he owe me to? I have some stuff that i want to get coated lol:roflmao:

 

[duramaxsandwich]

The tank on our 640 tractor holds around 35 gallons. Running the now second biggest Frozen Boost CAC (the $500 one, the one jim has), added ports in rear for dual in and dual out. Want to add some supports this year to it.

Make sure you check it b4 u start it up. I got one that leaked