Off Season Sled Pulling Mods
- Thread starter Rhall
- Start date
Weight box is coming around. It has two trailer jacks built into the backside of it to adjust it up and down to help load/unload off trailer (10 inches of travel total).:thumb:
The 05 looked so good for the test fit maybe she can unretire and come back for some WS?
Looks good soo far Ed. Pardon the ignorance but how much wieght do you pullers useally add?
Depends on the truck obviously. I usually had 1200 on the front. The box weighs about 400 and will hold ice/water for the intercooler. Wish the rules would allow the fuel cell and batteries in it as well but they don't.
Looks wicked!
There is a member on here that stripped his down by hand with a special paint stripper
He said "never again" took him forever!
Depends on the truck obviously. I usually had 1200 on the front. The box weighs about 400 and will hold ice/water for the intercooler. Wish the rules would allow the fuel cell and batteries in it as well but they don't.
WOW
Fresh Water or salt water? I know salt water weighs more and cools better, Just wonder if you guys ever mess with stuff like that:baby:
We have several of these on trucks now. And several to ship next week. It should eliminate any issues with the axle disconnect breaking and or shaft breakage. We're looking at resplining the Elocker and ARB to 1.75" and an appropriate spline count for that diameter.. but it really isn't necessary yet IMO.
Attachments
Yep.. Yours is on the list.. You want the one that I made from 4150? It's too purdy to powdercoat.. I clearcoated it.. Mmmm.. purple and gold welds!
Weight box is coming around. It has two trailer jacks built into the backside of it to adjust it up and down to help load/unload off trailer (10 inches of travel total).:thumb:
The 05 looked so good for the test fit maybe she can unretire and come back for some WS?
looks good:thumb:
:thumb: looks good. I was talking to Chase about these at the ITPA meeting the other day.
Is this the same length as the H2's pass. side, just stronger material or larger diameter also?
Weight box is coming around. It has two trailer jacks built into the backside of it to adjust it up and down to help load/unload off trailer (10 inches of travel total).:thumb:
The 05 looked so good for the test fit maybe she can unretire and come back for some WS?
looks good Eddie!
Same length to the flange but better material, larger diameter throughout until the splines bigger housing and bearing as well.
You need a couple
You need a couple
I might try and get u drunk again and see how many I can get....:spit:
We have ran several of the H2's with good luck.. but pm. a price I have a few trucks here at the shop now I could use them on...
We have ran several of the H2's with good luck.. but pm. a price I have a few trucks here at the shop now I could use them on...
I'm a cheap date!
I'll figure up your pricing.. It won't compare to the H2's but it's stronger.
I'll figure up your pricing.. It won't compare to the H2's but it's stronger.