Dmitri Vs. Shane Kellogg

[PureHybrid]

So.....doesnt rob use block filler on maxdout? Maybe he doesn't i dont know just asking but i thought several high hp dmax motors used it? Also i thought all cummins motors were sleeved from the factory anyway, granted like stated hes using thicker sleeves to go from 6.7-5.9 but if thats all he did it's not to modified of a block not arguing with ya just trying to get a take on how we could compare dimitris engine to shanes

As for compd i think its more they dont like dimitri in that thread not the dmax, not saying there aren't cocky ****ers over there that are like you say, they definitely are unforgiving on some things though

The Cummins ISB block has never had liners/sleeves. You have to step up to the C/L block for wet liners.

I think CompD members are alright, they just dont tolerate bs very much :spit:

 

[dieselson]

The D-max block is strong but it has a breaking point and a max effort unit needs it to help keep it together. I believe dmetri has split a block or two. The stock casting has its limits just few have found it or are looking for it.

Dmitri has never split a block

 

[Tony Burkhard]

Which year d max has the strongest factory block?
Lml?

The LML for sure. It has twenty pounds on the rest of them and its in the main area.

 

[Jwarren]

I dont see how he plans on using nitrous on an engine dyno that could stop that crank in its tracks at full load.

^^ X 2.



From my smart car.

 

[DIESELMAFIAPER.LB7]

with a lml block can you run a lb7 crank?

 

[juddski88]

Yes, but why? lol. They all break. Sorry to burst anyones bubble, there are faaaaarrrrrr more variables in the broken crank game than which generation crank is used

 

[PureHybrid]

A solid billet crank with roller bearings and an external lube system is the only way to go! :cool2:

 

[DIESELMAFIAPER.LB7]

Yes, but why? lol. They all break. Sorry to burst anyones bubble, there are faaaaarrrrrr more variables in the broken crank game than which generation crank is used

im interested in the block i know all years break cranks....

 

[juddski88]

If you want to run a lb7 crank you sure can run it in a lml block, but you can buy a new virgin lml crank for 710 bucks...pretty cheap money for a little more piece of mind

 

[DIESELMAFIAPER.LB7]

If you want to run a lb7 crank you sure can run it in a lml block, but you can buy a new virgin lml crank for 710 bucks...pretty cheap money for a little more piece of mind

so you wouldnt stick with a crank thats been fine up till now? whats a block run pm me or maybe start a new thread so we dont derail this anymore

 

[juddski88]

I ran a used crank once....never again. Had I been the one to mag it and install it and torque it, maybe my answer would be different. But on the other hand, now I know a virgin crank is cheap enough to make it worth buying right off the bat.

 

[Jwarren]

Engine dyno will put any engine to the test http://www.youtube.com/watch?v=_pn4Q-s3Sas&feature=youtube_gdata_player

From my smart car.

 

[Sledheadxp800r]

Engine dyno will put any engine to the test http://www.youtube.com/watch?v=_pn4Q-s3Sas&feature=youtube_gdata_player

From my smart car.

That's why most pulling clubs now require a cable routed over all inline Diesel engines :spit:

 

[DIESELMAFIAPER.LB7]

I ran a used crank once....never again. Had I been the one to mag it and install it and torque it, maybe my answer would be different. But on the other hand, now I know a virgin crank is cheap enough to make it worth buying right off the bat.

I was just planning on using my crank im running now but we'll see

 

[McRat]

...
I think CompD members are alright, they just dont tolerate bs very much :spit:

I have no problems with MEMBERs, but the Staff in general are a bunch of spectators with thin skins with their lips surgically attached to their GodSponsor's ahole, like a Human Centipede.

I tried to think of the most polite way of describing them, and that's the best I could come up with.

 

[dmax711]

I have no problems with MEMBERs, but the Staff in general are a bunch of spectators with thin skins with their lips surgically attached to their GodSponsor's ahole, like a Human Centipede.

I tried to think of the most polite way of describing them, and that's the best I could come up with.

:roflmao:

 

[MACKIN]

I don't go there enough to really form a opinion of the site. I don't care for multi brand forums anyway. One brand either takes the majority of discussion or it just turns into a bullshit discussion of bullshit meaningless bullshit!

 

[TRUBBS]

Dmitri has never split a block

He was telling all of us at edge that he split the block on overkill's big billy bad @$$ race engine & that's why he was using his "stock bottom end" tow truck engine that only had balancing /main studs & rods...

 

[1slowmax]

Maybe he could get the Buckle to sponsor him? He has promoted the fashion statement of bedazzled jeans far more than any other on a national level.:rofl:

Bedazzled jeans full of screw drivers and wrenches on top of a TV borrowed from his daddy James.....welcome to the Durrrrmitri show.

 

[juddski88]

He was telling all of us at edge that he split the block on overkill's big billy bad @$$ race engine & that's why he was using his "stock bottom end" tow truck engine that only had balancing /main studs & rods...

:spit: trubbs, you are the man, haha