DAVe3283

Heavy & Slow
Sep 3, 2009
3,724
292
83
Boise, ID, USA
Congrats! That is a crazy amount of power. Hopefully you can figure out what was slipping (hopefully just tires) and have another go at it. Congrats again!
 

Mike L.

Got Sheep?
Staff member
Vendor/Sponsor
Aug 12, 2006
15,681
232
63
Fullerton CA
yes old number was 1709, drakes dyno as i said is about 140 horse tighter than ours so that engine was working for that number, any answers from anyone on what im going to do if i blew through that tranny:confused::confused::(

I haven't seen a trans blow on a dyno. Seen plenty of converter clutches let loose. Your dyno sheet will tell you what let loose. You will have an rpm spike or a hp dip.
 

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
15,607
1,862
113
Mid Michigan
Congrats Dimitri!


Mike, he mentioned he had an odd dip in hp on the last run at 3100pulse. Post 185.
 

Alliance1289

New member
Apr 26, 2011
285
0
0
307
I will be starting a new thread probably tomorrow with the videos, dyno graphs, and some photos.

I will also go into some detail about how the weekend went and what we did to the truck.

Sent from my DROIDX using Tapatalk
 

TrentNell

Finally underway !!!!!
Jul 7, 2008
7,543
0
0
44
slc tuah
There is no correction factor . . . We were at sea level.



Sent from my DROIDX using Tapatalk

I have seen it before , that would be awesome if they were non corrected #'s , I wish every dyno event would just go non corrected and make things simple . Why didnt they count the 1729 on the on the results ?

"TPD Dyno Day Winners-
STREET STOCK- 576.1hp, Chad Eastlick's 2008 Ford
STREET MODIFIED- 700.8hp, Brett Lujan 1997 Dodge
SUPER STREET MODIFIED- 1218hp, Ron Allen 1992 Dodge
UNLIMITED- 1633.1hp, Dmitri Millard 2001 Duramax
A HUGE Congratulations to our Winners!!! "

Just because you are at sea level doesn't mean there was no correction factor.

Sent from my ADR6400L using Tapatalk

X2
 

Alliance1289

New member
Apr 26, 2011
285
0
0
307
I haven't seen a trans blow on a dyno. Seen plenty of converter clutches let loose. Your dyno sheet will tell you what let loose. You will have an rpm spike or a hp dip.

Mike,

I have the dyno sheets off the computer with and overlay of all 3 nitrous runs that I will post up in a new thread tonight when we get to the hotel here in about half an hour. I would very much like to hear your input on what you think happened based on what you can see in the graphs.

Sent from my DROIDX using Tapatalk
 

Alliance1289

New member
Apr 26, 2011
285
0
0
307
I have seen it before , that would be awesome if they were non corrected #'s , I wish every dyno event would just go non corrected and make things simple . Why didnt they count the 1729 on the on the results ?

X2

Trent,

I stand 'corrected' regarding my earlier statement about there being no correction factor. Now that I think about it, I remember (out of curiosity) taking a look at what the correction factor was before we started tuning for fuel only on Friday night. The correction factor that I saw was hovering in the low 1.01X to 1.03X area which wouldn't equate to much in terms of uncorrected horsepower numbers.

The winning 1633 hp number that was posted by TPD was the superflow number off Drakes Dyno. The 1729 hp number was corrected dynojet number which only beats Dmitri's previous record by a few horsepower in the grand scheme of things.



Sent from my DROIDX using Tapatalk
 

Bobo

New member
Aug 27, 2006
271
0
0
PPE had a 2000 RWHP engine at SEMA. Maybe you could try that next time.:roflmao: