Search results
-
Efi live?
A lot of effort and may I say hundreds of hours, to get a tune like those guys will give you! To get more info go to www.atptrucks.com and at the far right of the top bar click on EFI Live FAQS tab. The V2 and AutoCal are the devices that act as an Access Port to go from your computer to the...- lil bleur
- Post #5
- Forum: Duramax Tuning, Logging, and Gauges
-
Efi live?
You can do totally your own tunes from scratch if you want! However, if you don't want to spend all the time developing a tune, your best bet would be to get an Auto Cal preloaded with tunes from Adrenaline Truck Performance or Danville Performance.- lil bleur
- Post #3
- Forum: Duramax Tuning, Logging, and Gauges
-
2002 duramax in distress
When were the Inj last done? I'd say most likely the injectors need changed if they haven't been recently- lil bleur
- Post #4
- Forum: Southern Members
-
-
2002 duramax in distress
A number of conditions may cause DTC P0087 and DTC P1093 to set: 1.Excessive fuel return to the tank 2.A fuel injection pump failure 3.A fuel pressure regulator (RPCV) failure CONDITIONS FOR SETTING THE DTC The difference between commanded fuel pressure and actual fuel pressure is more than...- lil bleur
- Post #2
- Forum: Southern Members
-
EFI Live
Sorry Dude, Smoke/Lope tunes are totally NOT cool! It is a sure sign of a wanna be. If you want to smoke, go get a 12V Cummins! A sign of a good tuner is FAST and CLEAN! We as a duramax community don't need any more rookies going around smearing the countenance of Diesel Performance. The EPA is...- lil bleur
- Post #10
- Forum: Duramax Tuning, Logging, and Gauges
-
Assembling motor. Need answers!!
I was lucky to grow up helping my dad rebuild engines. If I didn't have him to teach me, I prolly would have done that too!:D -
LB7: Nice way to end the day:(
Yeh for sure! Maybe God was trying to tell me my work isn't the most important thing in life (I put in 80 hrs. last week). One of my buddies is a local log trucker and he will drive 18 hrs. at a stretch. I don't see how he does it! Four hours for me...max. -
Assembling motor. Need answers!!
I wouldn't worry about that. If you use a good assembly lube, just start it up. It will get oil pressure soon enough. Just let it idle for a bit. That's how I've done it on all the 100+ engines I've rebuilt. Haven't ever had a bearing spin because of it. -
LB7: Nice way to end the day:(
Sorry to hear it! I should not have been driving, I was having those micro sleeps, were you suddenly wake up and you didn't know you were sleeping. I knew I was tiered, but you know how it is...you got so much to do and sleeping isn't exactly what you want to do while on the job! -
LB7: Nice way to end the day:(
Nothing obvious at least. We'll see if its as good as it looks when it gets realigned :thumb: I think I'll let it sit till spring though. There's other trucks to drive -
LB7: Nice way to end the day:(
Got it apart last night. Its gonna take a new bumper, grill, head lights, headlight brackets, rad support, intercooler, radiator, A/C condenser, trans cooler, right fender, hood, and steering box shaft. Thankfully it didn't do any worse damage, the frame seems untouched. -
LB7: Nice way to end the day:(
Yes I dozed off. I had been putting in some long hours. The hole in the windshield is from a board from the fence. It came the whole way through the cab and punched out my back window, it missed my neck by about 6". I received not a scratch. Yes I'm definitely blessed to be alive! -
LB7: Nice way to end the day:(
Oh well, what else is gonna happen when you go to sleep?:rolleyes: -
Assembling motor. Need answers!!
X2 you definitely don't want to put it on the back of the Mains. -
-
-
DSP 5/EFI Live Getting My Butt Kicked. Is it my tune?
Did you pull the Audio/Radio Fuse when flashing?? -
Attention Newbies
If you post in the LB7 thread you will probably get a better response.- lil bleur
- Post #77
- Forum: Introductions
-
LLY: My first oil change in the lly
I rather doubt any retail automotive stores would have it, but I could be wrong.- lil bleur
- Post #29
- Forum: Fluids and Maintenance