Search results

  1. gmduramax

    Classic Prices-WTH???

    But his name is LBZ he would not be caught in an LLY 🤣
  2. gmduramax

    Super Bowl

    They just did 🤷‍♂️
  3. gmduramax

    Leaking cp3 pump - Mostly stock truck should i go with a stock unit?

    Doesn’t S&S make a “stock pump” but they remove the rpm restrictions in it
  4. gmduramax

    Best PreBuilt Transmission Brands

    Pay $700 in shipping or have multiple issues with a suncoast trans 🤷‍♂️ I could never keep a suncoast converter in my truck they didn’t last long
  5. gmduramax

    Factory Bearings ?

    What’s the race series bearings? I have over 125k on those. Truck still runs lol
  6. gmduramax

    Is a big single turbo right for you

    Mark had them on his website and no longer does, I’m not sure if he still sells them 🤷‍♂️ https://bullseyepower.com/product/64mm-ball-bearing-bmw-mid-frame/
  7. gmduramax

    Is a big single turbo right for you

    Not with ceramic coating possibly with blankets. With how much just a shitty turbo blanket unsecured made everyone should be running blankets even on stock turbos
  8. gmduramax

    Not another compound turbo thread

    Nah the G will be plenty for a ball bearing turbo
  9. gmduramax

    Not another compound turbo thread

    This what I was thinking but not sure if the 83 turbine would outflow an LB7 turbo including the factory gate. https://bullseyepower.com/product/64mm-ball-bearing-bmw-mid-frame/
  10. gmduramax

    Is a big single turbo right for you

    Ohhhh it’s been a while about 8 years in between all that. The rpm I gave was when I launched or had the converter locked to take the difference in converters out. When I ran the S475 I believe I had a shitty precision converter, didn’t couple very well so it was easier to keep the rpm’s up...
  11. gmduramax

    Is a big single turbo right for you

    Little slow at work so I thought I would mention the turbos I've ran if anyone is on the fence about a big single. This is on a LMM stock heads with springs, SoCal 6460 cam. First turbo I ran was a Box stock S475 83 turbine 1.0AR definitely not the stock turbo, the turbo would start to come...
  12. gmduramax

    Not another compound turbo thread

    I need help and maybe some opinions for a small turbo in a compound setup. Atmosphere turbo is a S483 billet 1.15AR on the turbine. And of course, I want 1300hp of air and instant spool. Little back story this is for the Limo, port and polished LB7 turbo in a compound setup with an S483. This...
  13. gmduramax

    Factory Bearings ?

    On my stock motor at 25000 miles I had wear on my bearings. Probably had 300 passes in the mid to low 12’s. Stock injectors, turbo and nitrous. If I had injectors I would imagine there’d be less wear but 🤷‍♂️ The truck was not ran easy
  14. gmduramax

    Backwards DPF?

    Depends on the truck, I believe 07.5-10 you can. IIRC 11-16 have a tornado looking thing before the dpf, they also have two different types of material inside one after another
  15. gmduramax

    LBZ turbo with 7+7 65mm compressor

    All of your options will slow spool. Keep the LLY turbo but install RDL up pipes, and port match the LLY turbo to the up pipes
  16. gmduramax

    Lbz/lly differences?

    Reluctor wheel is different
  17. gmduramax

    Drag tires

    Is your locker in the rear working? Rear end rising on launch? Front end not hitting the bump stop? I run street tires launching on nitrous at 1000hp and can get 1.5 60’s all day
  18. gmduramax

    Sorry, Another Best Lift Option Post

    You don’t need anything just go tighten the torsion bar bolts till they bottom out.
  19. gmduramax

    Need some help and sorry about the long post. Just providing all info

    I’m not familiar with that turbo but any time you go bigger, you lose drivability (unless you go ball bearing or a fancy wheel). If you wanted lower egt while towing you should have made the engine more efficient (better intercooler, up pipes). It sounds like it has a bigger turbine wheel or 10...
  20. gmduramax

    Happy New Year 2022!

    Happy new year everyone