Search results

Search the forum Search Articles
  1. K

    LB7: Engine injectors losing electrical power.

    So I take it you fixed the MAP sensor wire that was rubber through and grounding out? You said you kept blowing the ECM fuse so you cut the wire you just fixed.....so is it fixed now or just cut? A grounded circuit is not good. May want to follow that and figure where it’s shorted to ground...
  2. K

    Line (flare) wrench for brake job

    I agree with the kryptonite lines. I liked that it had all the factory style brackets on them, especially around the front. Only thing I had to do was drill and tap a small hole so that I could fasten them to my cognito uca’s
  3. K

    Banks Derringer review for the 2020

    Good info. Thanks for the share. Haven’t seen Rich in a while
  4. K

    LLY: Fuel pressure issue

    Definitely have your buddy swing by and hook up scan tool. Need to see what kind of fuel pressure you’re building vs desired.
  5. K

    Banks Exhaust Manifolds

    I was just having this conversation the other day with a co worker. Why is banks coming in so late? And not just to sell a product, but mostly also to point out everyone else’s flaws (so to speak) or why theirs don’t work as well as his will? Same with that rear diff cover videos he did. And...
  6. K

    CP4 pump warranty wuestion

    Most dealers I know would not warranty any fuel injection related concern you’d have if you did do the CP4 to CP3 conversion. But also know this, your injection pump also falls under your diesel emissions coverage warranty. And I believe that covers certain components (ex;cp4) for a period of...
  7. K

    I got Ripped Off! I need your Help!

    This has been an interesting read. Well, along with identifying the motor with vin stamp.....also go over your agreement/signed contract with them and see if they in fact violated any part of it. Not just motor they shipped you. Or was there no contract and it was all verbal? And I’d ask that...
  8. K

    What’s it worth? 2004 with 55,000 miles!!!

    It’s so crazy what trucks go for nowadays. I just can’t get over it sometimes.
  9. K

    2wd Street tires?

    I haven’t read through other 2wd builds on here but do you guys adjust pinion angle for the drag trucks ?
  10. K

    Single Cab Short Bed LB7 2WD build/INTRO

    $2400 for 01 and all wrong was p/s pump?! :woott: Good score bud.
  11. K

    Allison 6sp: transmission shift inhibited

    FWIW I’ve seen those year trucks have a little bit of fluid in that pass-thru connector and it still be a TCM problem.
  12. K

    2019 vs 2020 Towing Capacity. What changed?

    And that very well could be it
  13. K

    2019 vs 2020 Towing Capacity. What changed?

    Another thing they told us at training was the ability for the vehicle to slow the weight down raised trailering capacity. So I'm guessing the braking system has some improvements to it over the 19 model year
  14. K

    Rick Lance's Camaro has changed a bit

    She’s pretty. I am the biggest sucker when it comes to rotts. That’s my boy Magnus with my lab Daphne in the pic. Hope nothing but life and good health for your new girl. Car is looking good too
  15. K

    Factory style replacement exhaust manifold

    I bought the pass side a while back as a quick replacement. Came with a heat shield. Thought the bolts supplied were ridiculous and didn’t use them. Can’t comment on driver side from dorman.
  16. K

    LM2 Valve Clatter

    I have not heard anything yet of issues like what you are describing. And yes the “TAC” (technical assistance center) for GM is contacted for all new model vehicles. Engineering usually gets involved and wants to know. Could be a long road just so you know. Hang in there.
  17. K

    LB7: check engine light

    Can’t one of those autozone type stores scan your codes for free? I’m cringing every time I read your post about just wanting to guess at what needs to be done. The cost of a race fuel valve probably could’ve gone to a legit shop to get the codes read for you.
  18. K

    Clock not showing up

    :thumb:
  19. K

    wagler mechanical belt tensioner

    you're right Bdsankey, when I talked to Andrew from wagler about this he said these belt tensioners were being specifically designed for the guys turning some rpm with duel fuelers. So if they say they don't have one for an lb7 yet I'm going to wait til they do. i'm sure they know that the gm...
  20. K

    wagler mechanical belt tensioner

    If you do report back and let us know what happens. Thanks
Top Bottom