Search results

Search the forum Search Articles
  1. Bdsankey

    Round 3

    Yeah, they're a decent connecting rod! BC also typically has theirs on sale too for a similar price. The Callies have been fairly proven to the 1000-1200whp area. Beyond that I know I tend to go to SoCal rods for anything 1500hp and down. Above that I go Carrillo HD w/Trend pins.
  2. Bdsankey

    Well there goes my chances of 9s this year

    On the tester or the boost gauge when you made your WOT run? If it was your boost gauge, I personally would get the truck up to full operating temp and try again. These trucks have 90psi+ in the cylinder heads at WOT so it's not unreasonable to think it could be an issue above your testing range.
  3. Bdsankey

    PRND321 underline issue

    On an 01-05 truck there is no sensor in the valvebody that designates what gear the shifter is in, only the NSBU does that. What brand NSBU did you use? Is it a GM or parts store brand? Trace your NSBU wires from plug to plug and see if anything changes resistance when you wiggle the harness...
  4. Bdsankey

    Chevy1925 (James) Truck/motor build

    Could go even like 362 or 363. If I recall from the turbo response testing that was done ages ago, a 364.5 came up very very fast which surprised most of us at the time. For how you abuse things I think an internally gated S300 would be the ticket in the valley.
  5. Bdsankey

    Engine Oil Cooler Kits

    That's not an issue. So it sounds like offering it as maybe pushlock, DIY AN, or no lines is the best option.
  6. Bdsankey

    2020 Oil Cooler Retrofit Kits (01-19)

    Glad it made it there safe and sound! The reason I cut open the oil cooler box itself was to verify the cooler did not get damaged. I've had far to many show up damaged. As of late, GM has gotten it together on these not being thrown off the back of a moving truck haha.
  7. Bdsankey

    Chevy1925 (James) Truck/motor build

    That is what my setup uses for a valley charger. S364.5/480. I've done one customer's truck with a gated 366/485 and it's been awesome. If you need the borg PN for the divided internally gated housing let me know. Dustin has been crucial in that and has also shared some tips on how to improve...
  8. Bdsankey

    Billet rear hubs, rotating mass, suspension geometry, weight reduction

    I love and recommend Rick's products to anyone. I have put his castflow manifold/up-pipe setup through hell since 2017 and that's what is on my LB7 now. They were harvested off of my LLY that saw multiple 2000f-2200f sled pulls/drag strip passes. As for an intercooler, I try and push 01-10...
  9. Bdsankey

    PRND321 underline issue

    Without codes we're flying blind. I had a customer with a similar issue. He changed to a brand new GM NSBU, no fix. Changed his pigtail, no fix. Then he called me to diag the truck and we had no communication with the after he put my new built trans in. Replaced the TCM with a known good used...
  10. Bdsankey

    Round 3

    Welcome back!
  11. Bdsankey

    Engine Oil Cooler Kits

    100% agree on temp rating, just me being paranoid as we all know how some users can be. I am not implying that anyone on this page would point a finger but we all know how these new age owners/kid are and they find anyone to blame. I personally do not want to run stainless braided as I don't...
  12. Bdsankey

    Engine Oil Cooler Kits

    My print speed is god awful and outer layer adhesion is crap. I need to do some fine tuning but even then it's easily out paced by new printers. That's an option for sure. Honestly it's not all that much cheaper than DIY AN lines (barb and nut) but it is a reasonable choice! I did confirm that...
  13. Bdsankey

    Engine Oil Cooler Kits

    So, question for everyone. I'm looking at what to do for lines. Option 1: Currently my plan is to use Fragola Race Rite Pro (PTFE lined) pre-crimped hoses. My worry with this route is it will force everyone to use the same routing which I know may not work for everyone. My current routing...
  14. Bdsankey

    2020 Oil Cooler Retrofit Kits (01-19)

    I’ll shoot you a message! Sent from my iPhone using Tapatalk
  15. Bdsankey

    2020 Oil Cooler Retrofit Kits (01-19)

    I didn't see this, my appologies! Thank you to all who preordered, I've sent all 10 out and have ordered another 2 to keep in stock on the shelf! O-ring lube and thread locker did not come in so single use packets were not included this go around. I'm working with a few companies to order...
  16. Bdsankey

    Trailer Brake Controller

    You can use any Tekonsha brake controller in your truck. The age of your truck does not matter as these simply have power, ground, brake signal, and output to trailer. You could wire it up on any vehicle with those 3 inputs. It appears when you filter by year they show you only vehicle specific...
  17. Bdsankey

    Trailer Brake Controller

    Prodigy P3, Prodigy iD, Directlink, Curt Spectrum have all been good for me.
  18. Bdsankey

    05 duramax trans limp mode

    Let me know if you need any help! As for converters, the only concern I would have is IF it really is the trans failing you will just be putting debris into a brand new converter which doesn't usually end well.
  19. Bdsankey

    Engine Oil Cooler Kits

    Lahey is a legend. I found out I apparently ordered myself more shots......................... I only remember ordering one round, I guess one round turned into 4-5........... I completed my 3d print of my first bracket, will see today/tomorrow how they fit. I screwed up the first print hence...
  20. Bdsankey

    01-10 steering box redhead ,PSC ,OEM

    I haven't had any issues with the few dozen I've installed. One customer is approaching 60k miles and it's still tight.
Top Bottom