Search results
-
New part some might be interested in
Thanks for the responses.- MMLMM
- Post #71
- Forum: Duramax Hard Parts
-
.efi files /logged data
loaded to where? have you updated you software?- MMLMM
- Post #2
- Forum: Forum Suggestion Box
-
New part some might be interested in
You are trying to defend yourself, yet failed to answer some "tech" questions about the product in this thread. Give us some more info, why would it be better than a pickup? Have there been cases of it leaking due to tank bending when full? Can it be installed the way I asked? Wheres best...- MMLMM
- Post #67
- Forum: Duramax Hard Parts
-
-
Help: Yuck!!!
Not too sure, but for future ref. you could try spraying 'mud off' or baby oil from a weed sprayer under there first and it may help take it off next time.- MMLMM
- Post #2
- Forum: Appearance & Detailing
-
Allison 6sp: How much $
Short answer: No. You are only helping it a little. The tune will cause clutches to slip. Its assumed around 90hp is where the bad news comes. The way to correct this is better clutches, IE: a suncoast kit. A stage III will run just over $2k in parts. A converter should be added to at the...- MMLMM
- Post #8
- Forum: Mike L's Trans Talk
-
LMM Transfer Case Brace
bout time, holly fawk. lol wasnt that supposed to be part of my SC IV you did? ;) :hug: :D- MMLMM
- Post #4
- Forum: Mike L's Trans Talk
-
-
opinon what is considerd a built motor
X2, Im with Pat. Ive used built and Fully Built Built = Pistons or rods, or both Fully built = pistons, rods, headstuds, and at least 3 more HD parts lol.- MMLMM
- Post #15
- Forum: Smoke Signals
-
Allison 6sp: How much $
Once you get the valve body out of the truck you an do the work inside your house lol. And: 225 tune is still gonna be very hard on your trans even with a jr. kit....- MMLMM
- Post #3
- Forum: Mike L's Trans Talk
-
front locker for drag racing ?
What about rear locker, and a tru-trak in the front?- MMLMM
- Post #20
- Forum: Drag Racing
-
Allison 6sp: Trans slips a little around corner....
Problem fix.t TIP: Make sure your fluids are to there recommended capacity :D- MMLMM
- Post #9
- Forum: Mike L's Trans Talk
-
Allison 6sp: Trans slips a little around corner....
ROFL, DUR!!! Good point Mike. I wasnt thinking very good lol. Thanks Mike. Going for drive now I'll let ya know how it goes.- MMLMM
- Post #6
- Forum: Mike L's Trans Talk
-
Allison 6sp: Trans slips a little around corner....
Honestly, I've done 2 spin on changes, Maybe the oil in the spin-on made it that low cause I have habit of just switching and not re-fill..... Also just looked, and rear seal must be leaking just a tad...- MMLMM
- Post #4
- Forum: Mike L's Trans Talk
-
Allison 6sp: Trans slips a little around corner....
When I make a turn around a corner it will seem to slip a little, I let of roll thru turn and then it seems to lock back in. I let off throttle and coast thru turn, then after rolling straight, I can accelerate. Only happens just after I start driving, once I am driving it goes away. Only...- MMLMM
- Thread
- Replies: 8
- Forum: Mike L's Trans Talk
-
New part some might be interested in
Correct. :) Except only problem with current design, is that the ring itself has holes taped, if it were to loosen or leak a bit, you'd have to drop tank again to tighten it up...- MMLMM
- Post #49
- Forum: Duramax Hard Parts
-
-
New part some might be interested in
FYI: I think it would work a little better to insert the bigger piece thru the top of tank and then sammich it with the ring outside of the tank. How ever, is there enough room between the port with the mount ring there? It would look a littler cleaner and prolly seal a hair better.- MMLMM
- Post #41
- Forum: Duramax Hard Parts
-
Another How-to-burn DVD's thread
Just use windows dvd maker. Or Nero. There currently .avi correct? You just need to either convert them then burn the image, or use a general dvd "maker" program to convert, then burn. You still want those pistons? :)- MMLMM
- Post #2
- Forum: Smoke Signals
-
Real toyota ad...
Remember the vid of the making of the commercial where they build the big teeter totter rig. All the work trucks and everything are all ford trucks lol. theres one Toyota and its the one for the commercial. Is it this one?