Search results
-
-
p0776 p2723 on new suncoast trans HELP!!
Check voltage to trans with proper scan tool.- Mike L.
- Post #2
- Forum: Mike L's Trans Talk
-
2500HD Code U0101 Service Stabiltak light / Transmission in limp mode
I would try another TCM.- Mike L.
- Post #4
- Forum: Mike L's Trans Talk
-
-
-
03 lb7 trans problem
You need 12V minimum. Check ignition switch.- Mike L.
- Post #4
- Forum: Mike L's Trans Talk
-
03 lb7 trans problem
Check voltage to trans. Must be at least 12V KOEO and 13+V KOER.- Mike L.
- Post #2
- Forum: Mike L's Trans Talk
-
Gale Banks reacts to Hoonigan 1000hp build
There were untruths spoken by Gale and I'm very surprised by them. For instance; he gave Guy a sticker for his race car many years ago. There was no sponsoring. Guy was asked to start the motor and make it run. He had nothing to do with this program. Gale new this yet he felt like taking a shot...- Mike L.
- Post #109
- Forum: Smoke Signals
-
Gale Banks reacts to Hoonigan 1000hp build
I disagree with most of what you said. You sound like you're addressing a high school class and love hearing yourself talk. Problem is, the guys here have been there and done that. I have run Banks products and still do. I have met Banks and done work for him. He is a nice and smart guy. He did...- Mike L.
- Post #103
- Forum: Smoke Signals
-
Engine / Allison transmission alignment
Show a picture if you can- Mike L.
- Post #2
- Forum: Repower / Transplant
-
Shift range inhibited P0878 and no reverse intermittently
I would replace the Pressure switch manifold and internal wiring harness to start.- Mike L.
- Post #2
- Forum: Mike L's Trans Talk
-
-
Tuned a guys LB7; he now claims 6+mpg loss??
I never got better than 20 on my LB7 running 85/90 on the hwy with a kill tune from RidgeRunner. (Tony )- Mike L.
- Post #18
- Forum: Duramax Tuning, Logging, and Gauges
-
Rebuilt trans stalls in drive and dies.
Codes? Can't diagnose without codes. What year truck is it? Since it's your first build, we are going to assume you did something wrong.- Mike L.
- Post #2
- Forum: Mike L's Trans Talk
-
-
Converter slipping? Fifth or sixth gear clutch?
P0502 is a speed sensor code. Hook up a scanner and watch all 3 speed sensors.- Mike L.
- Post #5
- Forum: Mike L's Trans Talk
-
Converter slipping? Fifth or sixth gear clutch?
Scan it and get a code. Code should be a P0741.- Mike L.
- Post #2
- Forum: Mike L's Trans Talk
-
Help! Is my transmission going bad?
2 piece drive shaft or 1? Possible broken motor mount.- Mike L.
- Post #5
- Forum: Mike L's Trans Talk
-
Need Help Resetting TAPS with EFI Live
Try changing your internal filter.- Mike L.
- Post #8
- Forum: Duramax Tuning, Logging, and Gauges
-
Need Help Resetting TAPS with EFI Live
Did you just rebuild your Alli?- Mike L.
- Post #2
- Forum: Duramax Tuning, Logging, and Gauges