Search results
-
-
-
-
-
bell housing
Just ignore it. Leave the sensor in the bellhousing to keep out dirt.- Mike L.
- Post #2
- Forum: Mike L's Trans Talk
-
Inflation .... whats your thoughts on todays Markets?
I've done very well with income property along with the stock market.- Mike L.
- Post #30
- Forum: Smoke Signals
-
hard shifting after converter / trim spring install
Pull the valve body and check what you did. Make sure there is a spring on the A gain valve and not the B gain valve.- Mike L.
- Post #2
- Forum: Mike L's Trans Talk
-
LLY p0875 on a fresh build
Stck E shift valve. Pull the valve body.- Mike L.
- Post #2
- Forum: Mike L's Trans Talk
-
-
2003 silverado 2500hd change of transmission
All clips are the same size. If you can't find them I will send you some at no charge.- Mike L.
- Post #6
- Forum: Mike L's Trans Talk
-
2003 silverado 2500hd change of transmission
Check cooler fittings. Everything else is the same.- Mike L.
- Post #2
- Forum: Mike L's Trans Talk
-
-
-
-
Mike L Transmission
Call the shop # or the cell number in my signature and I'll ship one out. The reason for the cooler line block is to send most of the hot fluid back into the trans and keep the fluid hot and thin for less drag on the engine. This will increase fuel mileage by .02%. All vehichle manufacturers are...- Mike L.
- Post #22
- Forum: Mike L's Trans Talk
-
-
-
-
Trans build IMO getting hot.
Cooler being behind the bumper works just fine. You get some fan blade action there as you won't when the cooler is raised up in front of the fan clutch.- Mike L.
- Post #37
- Forum: Mike L's Trans Talk
-