Search results

Search the forum Search Articles
  1. DetailsUnlimited

    PPE Boost Controller

    Sorry to intrude on your thread but does the boost controller still provide boost if turned all the way down and off?
  2. DetailsUnlimited

    Tuning question

    Hope these work? 1000' track
  3. DetailsUnlimited

    Tuning question

    How could I put a log on here? Give me the steps.
  4. DetailsUnlimited

    Tuning question

    Thx I will look at these. I have top end. But would this be the same for adding power thru the middle of the power band? Say from the 330 mark to the 8th?
  5. DetailsUnlimited

    Tuning question

    OK maybe some Hint's?? Stock motor but running 10.3/10.4 in the 1000'. Running the 8th in 8.0/8.1. Would like to get time down to 7.8/7.9 in the 8th. Where would I start looking?
  6. DetailsUnlimited

    LBZ mileage tune

    I'll test it for ya if I can tow with it? I have rdl headers and ups with Pauls EGR delete. May have to change somethings but will give it a try.
  7. DetailsUnlimited

    Tuning question

    When modding a race tune, beside bumping up fuel, timing and pulse what else needs to be ramped up? Only doing in small increments/%'s. Thx Tark
  8. DetailsUnlimited

    LBZ: I'm Stumped

    A while back I had a similar problem with my pyro ground wire. It hit the exhaust and melted the plastic and then touched the frame and blew the green fuse that cost 4.99 each. 4.99 x 12 untill I figured it out. But it did the same thing to me a couple of times. Maybe this might help, maybe not???
  9. DetailsUnlimited

    Helping a friend with p0087

    Mine only happened with a high HP tune. The shim was in and still thru the code. The shim(spring) IMO only last so long before it gets weak. Put a PPE race valve in it and be done.
  10. DetailsUnlimited

    Price Reduced! EGR Delete LBZ LMM

    Is the bottom tube flanged so the boot does not come off? Sorry can't see, use I phone.
  11. DetailsUnlimited

    New turbo set-up

    I'm glad Mike and John are around these parts! Gives me something to look forward to with my truck!
  12. DetailsUnlimited

    Need help with PPE harness. Where does it plug into?

    Thanks for sharing your knowledge! :thumb:
  13. DetailsUnlimited

    Need help with PPE harness. Where does it plug into?

    Done! Now just have to clean the blood off the sharp metal heat shield! Black ground and green is the sensor wire.
  14. DetailsUnlimited

    Need help with PPE harness. Where does it plug into?

    How did you get it off? Screw driver
  15. DetailsUnlimited

    Need help with PPE harness. Where does it plug into?

    Damn u have to kidding! Under the egr tube!
  16. DetailsUnlimited

    Need help with PPE harness. Where does it plug into?

    Front or back? Thx
  17. DetailsUnlimited

    Need help with PPE harness. Where does it plug into?

    Fuel pressure gauge from ppe. Instructions for gauge wiring but none for harness. Thx
  18. DetailsUnlimited

    13.30s with super low rail press!

    Just tried it! Simple desired went to 26081 and FRP 26778. I guess I'm good.:hug:thx
  19. DetailsUnlimited

    13.30s with super low rail press!

    Thx for posting that Paint!!!!! Now I know how to test the cp3! Looks simple written down .:thumb:
  20. DetailsUnlimited

    13.30s with super low rail press!

    Thx. What about the AD?
Top Bottom